RF Biaser Bias Tee 10MHz-6GHz F HAM Radio RTL SDR LNA Low Noise Amplifier New

Features:
* The wideband amplifier feed circuit, the high frequency is affected by the parasitic capacitance parameters, and the performance drops sharply, so the feed needs to use BiasTee.
* BiasTee consists of ultra-wideband, near idealized, high frequency inductors and capacitors without resonance points.
* DC blocking capacitor: DC blocking to prevent DC voltage leakage to subsequent circuits or test instruments;
* High-frequency inductor: Isolation of AC information to prevent high-frequency signals from leaking into the power supply system.
* Fine workmanship and good performance.
* Long service life.

Specifications:
- Brand new and high quality
- Maximum Operating Current: ＜0.5A
- Insertion Loss: ＜1.2dB
- Operating Frequency: 10MHZ-6GHz
- Working Voltage: DC1-50V
- Color: as shown
- Material: Electric components
- Dimension: 32x42x12mm/ 1.34* 1.65* 0.47"

Application range:
A) Broadband amplifier: Some broadband amplifiers do not have a DC blocking capacitor inside, and the output needs to be powered. A bias is required. Some amplifiers have internal isolation capacitors that eliminate the need for an additional bias.
B) Optical fiber communication, laser drive: The driving current required by the laser diode is injected through the DC terminal of the bias; Communication data is injected through the RF side.
C) Optical modulation drive
D) Application of other test and measurement aspects

Package Included:
- 1 x 10MHz-6GHz Bias Tee + case