SG-CORE-EIP DAP Core Board IP20 Protection 9-28V (RJ45x2 Interface) Slave Station for EtherNET

Mechanical Parameters:
- Power supply: 9 - 28V (typ. 12/24V), over-voltage/over-current/anti reverse connection protection
- Working temperature: -30℃ to 75℃
- Working humidity: 5% - 95% non-condensing
- Protection level: IP20
- Station type: EtherNet/IP slave
- Communication method: EtherNet/IP
- Communication interface: RJ45 x 2, 10/100M adaptive
- Maximum bus length: 100m
- Configuration method: we provide upper computer software and EDS files

Top Terminal Description:
- V+: positive power input
- V-: negative power input
- PE: grounding
- NC: reserved, do not connect
- PORT1/PORT2: EtherNet/IP communication port

Parameters:
- Device address: 192.168.1.37
- Subnet mask: 255.255.255.0
- Gateway address: 192.168.1.1

Reset Button:
- The reset button under the EtherNet/IP module is used to restore factory settings. When the user forgets the current IP address and cannot communicate or configure, long press the RST button until the SY1 light keeps flashing. The DAP module restarts and runs with default parameters.

Package Included:
- 1 x Core Board