Terasic DE10-Nano SoC FPGA Development and Education Board Embedded Cyclone V P0496 800MHz Dual Core Processor

Introduction:
- The DE10-Nano Development Kit presents a robust hardware design platform built around the System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.
- The DE10-Nano Development Kit contains all the tools needed to use the board in conjunction with a computer that runs the system for Microsoft Windows XP or later.
- The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.

FPGA Device:
- For Altera Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)
- Serial configuration device - EPCS64 (revision B2 or later)
- USB-Blaster II onboard for programming; JTAG Mode
- HDMI-compatible TX, compatible with DVI 1.0 and HDCP v1.4
- 2 push-buttons
- 4 slide switches
- 8 green user LEDs
- Three 50MHz clock sources from the clock generator
- Two 40-pin expansion headers
- One Ar-duino expansion header (for UNO R3 compatibility), can be connected with Ar-duino shields
- One 10-pin Analog input expansion header (shared with Ar-duino Analog input)
- A/D converter, 4-pin SPI interface with FPGA

HPS (Hard Processor System):
- 800MHz Dual-core ARM Cortex-A9 processor
- 1GB DDR3 SDRAM (32-bit data bus)
- 1 Gigabit Ethernet PHY with RJ45 connector
- USB OTG Port, USB Micro-AB connector
- Micro SD card socket
- Accelerometer (I2C interface + interrupt)
- UART to USB, USB Mini-B connector
- Warm reset button and cold reset button
- One user button and one user LED
- LTC 2x7 expansion header

Package Included:
- 1 x Development Board
- 1 x DC5V Power Adapter
- 1 x A to Mini-B USB Connection Cable
- 1 x A to Micro-B USB Connection Cable
- 4 x Silicone Foot Cover