| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $244.02 | $239.04 | $231.57 | $221.61 | Contact US |
CUAV GNSS Module C-RTK 9Ps (Standard Version for Aircraft Side) for PX4 ArduPilot Flight Controller
$519.00
Mebay DC90DR Diesel Gasoline Gas Genset Start Generator Controller with CAN/RS485 Port 10 Relay Output 6 Sensor Input Can Replace Of DSE7310
$175.87
Original Sumitomo FC-6S Optical Fiber Cleaver blade FCP-20BL fiber cleaver cutter FCP-20BL SUMITOMO FC-6S Cleaver blade
$19.34
Description:
1. Magnetic tumbling is an automated polishing process that nearly eliminates the need for cyanide bombing, stripping, and thrumming.
2. Supplied complete with an acrylic bowl.
3. Most finishing operations are completed in under 30 minutes, just place your jewelry pieces, the steel pins, water, and special burnishing compound in the bowl, and press the "on" button. Tiny steel pins are driven by powerful rotating magnets at the base of the finishing bowl.
4. Designed for polishing intricate details, tiny crevices, and multiple settings, but not flat surfaces.
5. This magnetic tumbler can be used to process some rings with stones intact, such as cubic zirconia (cz), rubies, sapphires & diamonds.
Specification:
- Time control;
- Speed control;
- Auto reverse;
- Voltage: AC 220 – 240 volt; 50Hz
- Speed: 1800rpm
- Internal bowl dimension: D135 X H00mm
- Overall unit dimensions L*W*H: 230 X 230 X 335mm
- Note: the steel polishing pins not included. (If you need to buy, pls contact us)
