Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $46.58 | $45.63 | $44.20 | $42.30 | Contact US |
MEBAY DC10KE Engine Controller Manual Engine Control Module Used to Start and Stop the Engine
Description:
DC10KE is used to start and stop the engine manually. Engine speed, battery voltage, current running time and accumulation time can be displayed through its screen. The engine controller is also with various kinds of stop and alarm indications to monitor the engine status.
Moreover, it can also be connected to a PC via a data cable. Controller parameters can be set through software to easily match more different engines.
Features:
- It adopts 32-bit imported high-performance MCU control;
- 4-digit digital tube display: can be switched automatically or manually;
- Its key is durable to use;
- To start the engine via its key
- Parameter setting: parameters can be set through computer connection;
- With alarm protection functions;
- With waterproof ring: its panel with splash water resistance after installation;
- All wiring is completed through European terminal blocks. It is very easy and convenient to assemble, connect, repair and replacement equipment.
Parameter Display:
- Engine speed RPM;
- Engine battery voltage V;
- Current running time H;
- Cumulative running time H.
Alarm Protection:
- Emergency stop
- Over-speed
- Low oil pressure
- High water temperature
- External instant shutdown alarm
- Charge failure warning
Specifications:
- Power supply input: 8-33VDC
- Power consumption: MAX 2W
- Speed input: Frequency 300Hz~10kHz
- Oil valve output: MAX 16A
- Motor output: MAX 10A
- Excitation output: MAX 80mA
- Alarm output: MAX 16A
- Operating temperature: -30 to 75°C
- Storage temperature: -40 to 85°C
- Dimensions: 78 x 78 x 72mm/3.1 x 3.1 x 2.8"
- Hole spacing: 67 x 67mm/2.6 x 2.6"
- Weight: 280g/0.6lb
Package Included:
- 1 x Set of Engine controller
Note:
- Battery is not included.