| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $310.81 | $304.46 | $294.95 | $282.26 | Contact US |
XCNet-PN Protocol Conversion Gateway for Siemens S7-1200/1500 to S7TCP MODBUS TCP Master Slave
$217.49
XCNet-FX5U Protocol Conversion Gateway Ethernet Communication Module for Mitsubishi MELSEC iQ-F
$116.44
BCNet-S7300 Ethernet Communication Module Processor for Siemens PPI/MPI/DP to S7TCP MODBUS TCP
$159.19
MR-J2S-100A Original Servo Drive for Mitsubishi Servo Amplifier
Description:
- Power Supply (Voltage/frequency): 3-phase 200-230VAC, 50/60Hz
- Power Supply (Permissible voltage fluctuation): 3-phase 170-253VAC
- Power Supply (Permissible frequency fluctuation): ±5%
- Control System: Sinusoidal PWM control/current control system
- Dynamic brake: Built-in
- Speed frequency response: 550 Hz or more
- Protective functions: Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servomotor overheat protection, encoder fault protection, regeneration fault protection, under-voltage/sudden power outage protection, over-speed protection, excess error protection
- Maximum input pulse frequency (Position control mode): 500 kpps- when using differential receiver, 200 kpps- when using open collector
- Positioning feedback pulse (Position control mode): Resolution per encoder/servo motor rotation (131072 pulse/revolution)
- Positioning complete width setting (Position control mode): 0 - ±10VDC
- Excess error (Position control mode): ±10 rotations
- Torque limit input (Position control mode): Set by parameters or external analog input (0-±10VDC / maximum torque)
- Speed control range (Speed control mode): Analog speed command 1:2000, internal speed command 1:5000
- Analog speed command input (Speed control mode): 0-±10VDC / rated speed
- Speed fluctuation rate (Speed control mode): ±0.01% max.(load fluctuation 0-100%), 0% (power fluctuation ±10%), ±0.2% max. (ambient temperature 25°C ± 10°C), when using external analog speed command
- Torque limit (Speed control mode): Set by parameters or external analog input (0-±10VDC / maximum torque)
- Torque command input (Torque control specifications): 0-±8VDC / maximum torque (input impedance 10 to 12kΩ)
- Speed limit (Torque control specifications): Set by parameters or external analog input (0-±10VDC, rated speed)
- Structure: Self-cooling, open (IP00)
Package Included:
- 1 x MR-J2S-100A Servo Drive
