MX-K2 CW Keyer Automatic Key Controller High Performance Micro-controller for Radio Amplifier

MX-K2 CW Keyer Automatic Key Controller High Performance Micro-controller for Radio Amplifier

Instruction:
- Battery: Requires 2 x AAA battery (not included)
- J1: Mute buzzer
- The F1 key remembers 60 words and has shutdown protection.
- The F2 key remembers 50 words and does not protect data in the event of a power failure.
- The R3 key is used for speed control. When the value of R3 decreases, the speed will increase.
- Recording: Continue pressing F1/F2 for more than half a second, and you will hear "M". Now the CW will be automatically recorded.
- When everything is complete, press F1/F2, and you will hear an "S".
- If you exceed the volume and additional torque, it will alert you with an "F", It will not be recorded.
- Information: Each piece of information can not only be stored in a long memory, but also be divided into multiple pieces.
- Enter the portion of the EOM (End of Message) at the end of each segment.
- Play clip: If you want to play the second clip, press the memory key twice. If you want a third one, then press the key 3 times, etc.
- Command mode: Press F1 and F2 simultaneously, you will hear "C", and now you are in command mode
- End command mode: Press F1 and F2 simultaneously again, or you can press the auto key to enter "D". When you use the automatic key, the image will make a judgment: You will hear "R" to obtain the correct command, and? "For an invalid command.".
  "A": Turn off long and short voice memory.
  "B": Open long and short voice memory. This is the most common command.
  "C" and "E": Repeat the game. Automatically stop after playing 255 times under the "E" command mode.
- If you want to turn it off, just press the short voice button. Press again after Keyer makes an "R" judgment, it will end.
- "The 'C' cannot be used automatically, but can be used as a flag.". If you want to turn it off, just press the short voice button.
- Press it again and it will end after Kaye makes the "R" judgment.
- "D" ends command mode and returns to normal mode. Transfer the command "T" for 30 seconds, then return to Command mode.
- If you press the AUTO or MEMORY key within 30 seconds, it will stop and return to normal mode.

Specifications:
- Material: FR4
- Power supply: 2 AAA batteries (not included)
- Product size: approximately. 12x5.2x2.5cm/4.72x2.05 x 0.98in

Package Included:
- 1 x CW Keyer

Note:
- Battery is not included.