PCM1794A+NE5534 Raspberry Pi HiFi Xmos DAC Sound Card W/Power Board X10 KIT-B

PCM1794A+NE5534 Raspberry Pi HiFi Xmos DAC Sound Card W/Power Board X10 KIT-B     

Descriptions:
- PCM1794A+NE5534 Raspberry Pi HiFi Xmos DAC Sound Card W/Power Board X10 KIT-B
- X10 Kit-B includes :  X-10 DAC,  X10-PWR & X10-I2S
- Suitable for Raspberry Pi version: > Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
  
Features:
X10-DAC board:
* High-End Stereo DAC IC Chip (PCM1794A)
* Dynamic Range Signal-to-Noise Ratio (SNR): up to 127dB and THD+N 0.0004%
* With High Quality Op Amp (NE5534, can replace other Single Op Amp, Don't use dual OP-amp)
* Maximum Support : 24bit /192KHz
* Use ultralow Noise Low Dropout Regulator (< 10μVRMS)
* RCA gold-plated socket
* WIMA film capacitors and gold-plated IC sockets
* Can be used with XMOS xCORE-AUDIO Digital Interface Board
* Easy to install to Raspberry Pi mainboard without complicated wiring
* Just need 4 wires can be connected to other I2S devices for high-end audio decoding
* Able to power to the Raspberry Pi mainboard directly without an additional power adapter
 
 
X10-PWR power board:
* Provides +/- 15VDC power to op-amp, +5VDC to power DAC IC chip, +5.1VDC to power XMOS interface board and Raspberry Pi board
* Using ultralow noise low dropout TPS7A470x regulator (< 4μVRMS)
* Using high-quality components such as ELNA and Nikon professional audio capacitors
* Terminals used for easy to connect various R-type transformer

 
X10-I2S XMOS Digital Interface Board:
* Equipped with XMOS xCORE-AUDIO series IC chips.
* Perfectly compatible with Raspberry Pi motherboard and improve clock jitter.
* Plug in will be OK to use, no need additional drive, no need for tedious setup.
* Equipped with SITIME low jitter no temperature drift low phase noise double crystal
* Ultralow noise low dropout regulator (< 10μVRMS)
* Support I2S digital audio interface, simultaneous output for coaxial and SPDIF
* Support PCM sampling rate 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384KHz (Match with X10-DAC to use, maximum support 192HKz)
* Coaxial and S/PDIF up to 24bit/192KHz
* Native DSD, DoP64 and DoP128 (Match with X10-DAC to use, only support DOP)
* Optional power supply : USB or R-type transformer
* I2S interface pin header location is reserved on the board for easy connect to other DACs
  
 
Packing list:
- X10-DAC*1:
- DAC Board PCM1794A OPA-NE5534 1 pc
- Single copper post M2.5x20mm M/F 4 pcs
- Double Copper Post M2.5x20mm F/F 4 pcs
- X10-PWR*1:
- Linear power board 1 pc
- Single copper post M2.5x20mm M/F 4 pcs
- Screw M2.5x6mm 8 pcs
- Raspberry pie motherboard power supply line 1 pc
- X10-I2S*1:
- XMOS Digital Interface Board 1 pc
- USB connection board 1 pc
- Screw M2.5x6mm  8 pcs
- Double Copper Post M2.5x20mm F/F  4 pcs