PD65W 65W 0°C-350°C Mini Preheating Station PCB Preheater SMD Preheating Rework Station with Screen

PD65W 65W 0°C-350°C Mini Preheating Station PCB Preheater SMD Preheating Rework Station with Screen

Features:
- Ultra-small intelligent preheating station supports constant temperature
- It can eliminate redundancy, retain enough effective heating area, and greatly save energy consumption and heating time
- Widely used due to efficient heating area and reduced energy consumption
- Screen display and temperature control
- Centralized preheating running parts reduce damage to nearby parts
- Heating can be sped up thanks to USB type-c interface and PD protocol

Specifications:
- Input interface: Type-C
- Power supply: PD 65W 20V 3.25A (recommended for PD65W)
- Temperature range: 0°C-350°C (The lowest temperature is the ambient temperature. The temperature can only be raised, not lowered)
- Housing: Quality 3D printed shell without delamination
- Product dimensions: 5.6 x 5.6 x 3.5cm/2.2 x 2.2 x 1.4" (LxWxH)
- G.W.: 0.35KG/0.8LB

Package Included:
- 1 x Preheating station

Instructions:
- Double click on buttons and press the buttons at the same time: heat or stop heating
- Double click on buttons and press and hold the buttons to enter menu interface or exit
- Double click on buttons to confirm
- Note: It is recommended that the temperature should not exceed 250°C.

FAQ:
Q: How many volts do I need for the power supply?
A: One 20V 3.25A charger supporting PD protocol is required. Theoretically, it can support PD protocol with a voltage of 220V.

Q: Why does the heating start from a black screen and then restart?
A: Because this issue triggers charger protection, most of which results in the charger model being recorded. You'll need to replace a charger or cable.