Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $201.64 | $197.52 | $191.35 | $183.12 | Contact US |
Pixhawk PRO Flight Controller with GPS and V5 500MW 433Mhz Telemetry Radio for Quadcopter Ardupilot
Features:
- Pixhawk PRO supports the latest official firmware for Ardupilot and PX4
- Telemetry radio modules can be used for wireless communication between Pixhawk and computer or mobile phone
- Advanced 32-bit high-performance processors (2MB flash) for ARM CortexM4 can run RTOS real-time operating system for NuttX
- 14 PWM / servo output
- Bus interface (UART, I2C, SPI and CAN)
- The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe
- Provide automatic and manual modes
- Provide redundant power input and fail-over
- Multi-color LED lights
- Provide multi-tone buzzer Interface
- Micro SD recording flight data
- Type-C USB port
- GH1.25 port
Interfaces:
- 5 high voltage compatible UART 1 and 2 with hardware flow control
- 2 CAN
- Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
- For Futaba SBUS compatible inputs and outputs
- PPM signal input
- RSSI (PWM or voltage) input
- I2C
- SPI
- 3.3 and 6.6VADC input
- External type-c USB interface
Package Included:
- 1 x Pixhawk PRO
- 1 x PPM board
- 1 x I2C board
- 1 x RGB LED module
- 1 x OLED module
- 1 x Safety button and buzzer
- 1 x TF card & SD card adapter
- 1 x Vibration damper plate for flight controller
- 1 x 3D power module
- 1 x GPS holder
- 1 x M8N GPS
- 2 x V5 500MW 433Mhz telemetry radios
- 2 x Antennas
- 1 x Set of cables (including 4P GH1.25, 6P GH1.25 and 2.54Pin)