MINICUBE2 QB-MINI2 Emulator Development Platform Flash Memory Programmer for Flash MCU

MINICUBE2 QB-MINI2 Emulator Development Platform Flash Memory Programmer for Flash MCU

Product Description:
- MINICUBE2 is a multi-function emulator (on-chip debugging + flash programming) which is small (48x48 mm2), light-weight, low priced. This single unit covers it all from debugging to mass production.
- This product supports serial connection, JTAG connection is not supported. For details refer to the documents of the MCU you use.
- Mode:QB-MINICUBE2(QB-MINI2)        
- Origin:Japan RENESAS
- MINICUBE2 can do on-chip debugging and flash programming.
- Compatibility,MINICUBE2 is suitable for 8~32 bit micro controller(78K0, 78K0S, 179K,78KOR, V850 micro controller)：
- Hardware tools can be shared
- Reducing the cost of transplant development
- On-chip Debug Emulator Flash Memory Programmer

Product Detail:Support for this product is limited to customers who have already adopted these products. If adopting new products, please consider the successor.

Successor:E1 Emulator

Family:RL78     
- Recommended Emulator:E1 Emulator        
- Note:E20 Emulator is also supported, however, the supported debugging function corresponds to that of E1 Emulator.

Family:RX
- Recommended Emulator:E1 Emulator
- Note:E20 Emulator is also supported, however, the supported debugging function for - RX200 corresponds to that of E1 Emulator.

Family:V850
- Recommended Emulator:E1 Emulator
- Note:MINICUBE2 has been also usable.
E20 Emulator is also supported, however, the supported debugging function corresponds to that of E1 Emulator.

Family:78K
- Recommended Emulator:E1 Emulator
- Note:MINICUBE2 has been also usable.
E20 Emulator is also supported, however, the supported debugging function corresponds to that of E1 Emulator.

Family:R8C
- Recommended Emulator:E1 Emulator
- Note:E20 Emulator is also supported, however, the supported debugging function corresponds to that of E1 Emulator.

As for the details of supported MCUs for MINICUBE2,Click here  

 Features:
- Small and light-weight
- Since it's 48mm×48mm×13.9mm, small and light-weight, it can save space in development/mass production, and it's also easy to carry.
- Low price
- Compared to the MINICUBE, MINICUBE2 costs one-third the price, which can reduce your initial costs for development and mass production.
- Mode LED
- The appearance of the mode LED changes according to the status of hardware and software.

Self-testing functionMINICUBE2 has a self-testing function, which is used to detect faults in MINICUBE2 and perform maintenance.

Specifications:
- Product type name:QB-MINI2
- Supported MCUs:V850E1, V850ES;78K0R, 78K0, 78K0S
- For details refer to documents of the debugger you use.
- PC interface:USB 2.0 Full-speed/High-speed
- User interface:16-pin connector (2.54mm-pitch general purpose connector)
- Host machine interface:Connected via the included target cable.(Signals vary depending on the target MCU.)
- Power supply for emulator:USB-bus powered
- Emulator main unit dimensions (mm):48 (W) × 48 (D) × 13.9 (H)
- Emulator main unit weight:Approx. 40 g
- Overseas standards:Supported

The detailed information varied with the target device, regarding the following on-chip debuggers: Click here  
                                                                                                                                                                        Click here


Note:Software is not included. Purchase it separately.
Integrated Development Environment CS+:Click here  

Supported software:
- To use MINICUBE2 download the following software.
- Integrated Development Environment CS+
- Flash Programming tool Renesas Flash Programmer

Target device:
- V850 Family
- 78K0R
- 78K0
- 78K0S

Below you will find information to support the development of your application.

Package List:
- 1 x  Emulator main unit
- 1 x  USB cable
- 1 x  Target cable (for 16-pin and 10-pin)
- 1 x  78K0-OCD board
- 1 x  Setup manual