10G PON Stick XGPON/XGS-PON Stick ONU 8311 2.8.3 Version Compatible with 10G Switch and R86S

* Brand New 10G PON Stick XGSPON Stick SFP+

* Dual XGSPON/XGPON Mode. Brand New Batch, 1-Year Warranty

* Directly Compatible With Household Fiber Cable, No Adapter Required

* Support SN/LOID/PLOAM Password Authentication & Spoofing

* Chinese Firmware With Web UI Backend, No Command-Line Setup Mandatory

* Compatible With ZTE C600, Huawei OLT5800 Series, China Telecom/China Mobile/China Unicom

* Support SN Password & LOID Authentication

* Tested & Fully Functional In Guangxi, Shenzhen, Shanghai, Zhejiang, Hebei, Jiangsu And Other Cities across China. It achieves flawless registration on O5 networks, with stable operation for the vast majority of other regions.

* Ultra-compact Design to Save Space: This is the core value of the ONU Stick. It adopts SFP or SFP+ packaging and is the size of a USB flash drive. It can be directly inserted into devices equipped with SFP/SFP+ optical ports for use, reducing transmission latency between devices.

* Break Through the Gigabit Speed Bottleneck: The ONU Stick is designed to solve the problem that devices cannot reach the broadband speed provided by operators due to hardware limitations. For example, many gigabit optical modems supplied by operators only have gigabit Ethernet ports, which restrict the redundant performance of broadband. The ONU Stick communicates directly with routers through the SFP port, easily reaching the full 1200M or higher broadband speed provided by operators. It is one of the low-cost solutions to fully unlock the performance of gigabit networks.

* Extended Features for Tech Enthusiasts: The ONU Stick also meets the needs of hardware enthusiasts, supporting multi-PPPoE dial-up and other diverse application scenarios.

* The ONU Stick is merely an optical-to-electrical conversion product. It can flexibly replace certain certification parameters of standard optical modems to complete network registration. However, its heat dissipation performance and operational stability are slightly inferior to optical modems of the same grade.

* Compatible with devices for China Mobile, China Telecom, China Unicom, Huawei and Nokia

* It supports XGPON broadband services of China Telecom, China Unicom and China Mobile.

* Customized SN/LOID/PLOAM Password/MAC address verification is available.

* It comes with Chinese firmware and built-in web UI backend.

* Equipped with UPC SC fiber interface, the household fiber broadband cable can be directly connected to the ONU Stick without adapters.

* Compatible with ZTE C600, Huawei OLT 5800 series equipment for China Telecom, China Mobile and China Unicom networks.

* 1 x 10G ONU Stick

* Package weight: 0.4kg

* Product Name: XGS PON ONU Stick

* Chipset Solution: PRX126 for Maxlinear

* 3.3V Power Supply, Maximum Transmission Distance Up To 20KM

* Data Encryption Support

* Compliant With SFP MSA Standard

* Configurable VLAN Function

* RoHS Compliant

* Online Firmware Upgrade Supported

* Fault Alarm Notification

* Dynamic Bandwidth Allocation

* Multicast Packet Passthrough

* Support SC/APC & SC/UPC Fiber Interfaces

* The XGSPON STICK optical module, also referred to as SFP+ packaged PON ONU module in the corporate standard of China Telecom, is mainly used to replace SFU ONT and complete single-port optical-electrical conversion for gigabit (10-gigabit) speeds in PON networks.

* The XGS PON STICK fully meets the requirements of carrier-grade FTTB, FTTH and FTTO devices. It supports hot-plugging into the 10G SFP+ slots of Layer 2 Ethernet switches, turning the complete device into an ONT that can be directly connected to XGSPON optical networks. The central office OLT only needs to register the XGS PON STICK optical module in the same way as configuring conventional optical modems, enabling the communication device to complete access switching from the original P2P network to the PON network.

3.1. Insert the XGS PON STICK module into the optical port of a switch or router, then verify connectivity via ping test.

3.2. Login Method: SSH login (Telnet access is not supported for the time being)

* IP Address of STICK Module: 192.168.1.1

* Username: root

* No login password

3.3. Main Operation Commands:

* Check VLAN Configuration Delivered by OLT

tc filter show dev eth0_0 ingress

* View Counters (MAC1: PON port, MAC4: LAN port)

switch_cli xgmac "*" get rmon

switch_cli xgmac "*" clear_rmon

pon eth_rx_counters_get 1024

pon eth_tx_counters_get 1024

* Capture OMCI Data Packets

tcpdump -i gem-omci -w <file name>

* Read Captured OMCI Data Packets

tcpdump -r <file name>

* Export Data Packets

tftp 192.168.1.2 -l OMCI_date -p

* Modify LOID/LOID Password Registration Parameters

uci set omci.default.loid='II_name'

uci set omci.default.lpwd='II_password'

uci commit

sync

Example:

uci set omci.default.loid=sadasfgqwqwd

uci set omci.default.lpwd=hgdgfshdfsdas

uci commit

sync

3.4. Common Configuration Commands:

4.1. OLT

* For mainstream brands including ZTE, Huawei and Nokia.

4.2. Switches

* For Huawei, H3C, TP-LINK, Cisco and more.