Pure Sine Wave Industrial Frequency Inverter Drive Board Inverter Circuit Board 12V 24V 36V 48V 60V

Pure Sine Wave Industrial Frequency Inverter Drive Board Inverter Circuit Board 12V 24V 36V 48V 60V  

Interfaces:
- Switch Port: Connect to a small switch, enabling power-on or standby control
- Indicator Port: Connect LED to indicate standby or power on
- Fan Port: Connect to 12V cooling fan
- 220V Port: Connect AC voltmeter to detect inverter output voltage
- Feedback: Connect to the 220V terminal of a transformer, detect the output voltage and regulate the sampling effect

Jumper Settings of the Drive Board:


Note:
- Default Settings: JP5, JP2, JP7 and JP8 are short-circuited. And the corresponding functions are 50Hz, 3s soft start, and dead time 300nS. You can change the settings according to your needs.
- Jumpers with same functions cannot be short-circuited at the same time. For example, JP1 and JP5 must not be short-circuited at the same time.

LED Alarm Indication:
Thanks to EGS002 driver board with LED alarm functions, you can judge fault types by LED. Definitions:
- Normal: Always on
- Over-current: Flashes twice and turns off for 2s. Repeat again and again.
- Over-voltage: Flashes three times and turns off for 2s. Repeat again and again.
- Under-voltage: Flashes four times and turns off for 2s. Repeat again and again.
- Over-temperature: Flashes five times and turns off for 2s. Repeat again and again.

Optional Types:
- 12V 1000W
- 24V 2000W
- 36V 2800W
- 48V 3600W
- 60V 4000W

Note:
- Please choose the type you want when purchasing. Thank you!
- Other items pictured are not included in the package.

Package Included:
- 1 x Inverter Driver Board