RoboMaster C620 Brushless DC Motor Speed Controller FOC 32-bit Driver Chip for M3508 P19 Gear Motor

Optional Configuration:
* M3508 Motor
* M3508 Motor + Standard Bracket
* M3508 Motor + Reinforced Bracket
* M3508 Motor + Reinforced Flange
* M3508 Motor + Reinforced Bracket + Reinforced Flange
* C620 ESC

M3508 Motor (Optional):
1. Description:
M3508 P19 Brushless DC Gear Motor is a high-performance servo motor, specially designed for small and medium-sized mobile platforms and robots. Compared with traditional square wave drive, the M3508 gear motor features sinusoidal drive used with RoboMaster C620 Brushless DC Motor Speed Controller, which boosts higher efficiency, flexibility, and stability. The gear motor’s reduction ratio is approximately 19:1.

2. Motor Parameters:
* Weight: 365g
* Outer Diameter: 42 mm
* Total Length: 98.4 mm
* Output Shaft: D-shape with threaded hole
* Output Shaft Diameter: 10mm
* Rated Voltage: 24V
* No-load Speed: 482rpm
* Maximum Continuous Torque: 3N·m
* Maximum Speed at 3N·m: 469rpm
* Operating Temperature: 0-50°C

Standard Bracket (Optional):
* Compatible Motor: M3508
* Material: 6061 Aluminum Alloy
* Length: 52mm
* Side Mounting Threaded Hole: M5 Threaded Hole
* Bottom Mounting Hole: M4 Threaded Hole
* Surface Treatment: Black Sandblasting & Oxidation
* Weight: 81g
* Width: 28mm
* Height: 64mm
* Top Mounting Hole: M4 Threaded Hole

Reinforced Bracket (Optional):
* Applicable Motor: M3508 Motor
* Material: 6061 Aluminum Alloy
* Side Mounting Threaded Hole: M5 Threaded Hole
* Length: 52mm
* Top Mounting Hole: M4 Threaded Hole
* Surface Treatment: Sandblasted Black Oxidation
* Weight: 89.4g
* Width: 28mm
* Height: 64mm
* Bottom Mounting Hole: M4 Threaded Hole

Reinforced Flange (Optional):
* Compatible Motor: M3508 DC Brushless Motor
* Material: 6061 Aluminum Alloy + 45 Steel
* Inner Diameter: 10mm D-shaft
* Outer Diameter: 55mm
* Outer Boss Height: 3mm
* Inner Boss Height: 23mm
* Surface Treatment: Black Sandblasting & Oxidation
* Weight: 55g
* Total Height: 31mm
* Outer Boss Diameter: 20mm
* Inner Boss Diameter: 22mm
* Mounting Hole Size: 3mm Through Hole + M4 Threaded Hole

C620 ESC (Optional):
1. Description:
Using a 32-bit motor driver chip and Field-Oriented Control (FOC), the RoboMaster C620 Brushless DC Motor Speed Controller enables precise control over motor torque. It is compatible with the M3508 P19 Brushless DC Gear Motor to create a complete propulsion system. Users can configure and update speed controller firmware using RoboMaster Assistant.

2. Parameters:
* Signal Type: CAN, PWM
* Maximum Continuous Current: 20A
* Length with Cable: 344±15 mm
* Rated Voltage: 24V
* Weight: 35g
* Dimensions: 49.4x25.8x11.5 mm

Packing List (Depending on Selected Configuration):
M3508 Motor:
* 1 x M3508 Motor

M3508 Motor + Standard Bracket:
* 1 x M3508 Motor
* 1 x Standard Motor Bracket

M3508 Motor + Reinforced Bracket:
* 1 x M3508 Motor
* 1 x Reinforced Motor Bracket

M3508 Motor + Reinforced Flange:
* 1 x M3508 Motor
* 1 x Reinforced Flange

M3508 Motor + Reinforced Bracket + Reinforced Flange:
* 1 x M3508 Motor
* 1 x Reinforced Motor Bracket
* 1 x Reinforced Flange

C620 ESC:
* 1 x C620 Motor Speed Controller

Packaging Details (Depending on Selected Configuration):
M3508 Motor:
* Package weight: 0.45kg

M3508 Motor + Standard Bracket:
* Package weight: 0.45kg

M3508 Motor + Reinforced Bracket:
* Package weight: 0.45kg

M3508 Motor + Reinforced Flange:
* Package weight: 0.45kg

M3508 Motor + Reinforced Bracket + Reinforced Flange:
* Package weight: 0.45kg

C620 ESC:
* Package weight: 0.15kg