QUICKO T12-952 OLED T12 Quick Heating Solder Station Kit US w/ 907 Soldering Handle & Soldering Tip

QUICKO T12-952 OLED T12 Quick Heating Solder Station Kit US w/ 907 Soldering Handle & Soldering Tip

Read before Purchasing:
- On initial use, the display will flash and the main unit will beep an alarm, which is normal. After adjusting to about 360°C and using for 2-5 minutes, it will gradually enter a normal state.
- To prevent tin oxidation at high temperatures, when use a new soldering iron tip for the first time, please heat the tin while heating to protect the soldering tip.
- The temperature range of this machine is 200°C-480°C, and the recommended temperature is 300°C-380°C. 390°C can be used for electronic welding and maintenance work. Do not use it above 400°C for a long time.
- The temperature of this machine has been corrected, and it is ready to use. Users who do not have special needs and do not have professional temperature measuring equipment should not change the [Temperature Calibration] option.
- When the new soldering tip is heated for the first time, the temperature will rise slightly. After 1-3 hours of normal use, it will can melt tin within 8 seconds.
- 8-second tin melting is only for high-quality, high-purity and low-melting solder wire. The higher the lead content, the slower the tin melting speed and the higher the required operating temperature.

Features:
- Quick heating and accurate temperature control
- Automatic sleep & automatically power off
- Raise the handle to wake up the main unit
- Get higher temperature by pressing the encoder
- STM32 Micro more stable program
- Grounded main unit makes it safer to use
- Temperature: 200-480℃
- Tin melting time: 8s

Package Included:
- 1 x Soldering Station
- 1 x 907 Soldering Handle
- 1 x K Soldering Tip

Note:
- Battery is not included.