SLMZ-LS-240S 1000ML Industrial Built-in Water Cooling Module Pump Reservoir (24V Pump without Alarm)

SLMZ-LS-240S 1000ML Industrial Built-in Water Cooling Module Pump Reservoir (24V Pump without Alarm)

Attention:
- The pump reservoir combo comes without accessories. If you need to purchase accessories, such as fittings, tubes, water coolant and power supply, please contact customer service to purchase separately!
- Make sure that the input of the module is a standard voltage and the current is over 5A. It is strictly forbidden to use it in the over-voltage range, as the over-voltage may damage the water pump and fan.
- Water coolant pictured is not included, for demonstration purpose only.

Features:
- 1000ML pump reservoir combo
- Optional versions: without alarm; with alarms (including water level, stop and high temperature alarms)
- With two 12cm/4.7" 2500rpm fans and an aluminum radiator
- Its shell made of aluminum alloy
- Designed with a DC brushless pump
- With a DC5.5.*2.1mm interface
- Mounting slots at the bottoms make it easy to install

Product Specifications:
- Model: SLMZ-LS-240S
- Weight: 2.75kg/6.1lb
- Power: about 25W/30W
- Capacity: 1000ml (please allow slight error due to manual measurement)
- Fan: Two 12cm/4.7" 2500rpm fans
- Dimensions: 148mm x 150mm x 292mm / 5.8" x 5.9" x 11.5"
- Interface: DC 5.5*2.1mm
- Thread: G1/4 thread*4

Package Included:
- 1 x Pump Reservoir Combo

Packaging Details:
- G.W.: 3kg

Settings:
- Speed alarm: Press and hold the up button for setting. Press the up/down button to set the speed alarm value (the setting range is 0-8000L/min, and the setting interval is 500L/min). The value will be automatically saved when there is no operation for 3 seconds.
- Temperature alarm: Press and hold the down button for setting. Press the up/down button to set the temperature alarm value (the setting range is 5-100°C, and the setting interval is 1°C). The value will be automatically saved when there is no operation for 3 seconds.
- Water level alarm: An alarm will be triggered when the water level in the container drops below the sensor. Press any button to stop the alarm. Press the up and down buttons at the same time to disable the alarm (please note that the alarm will not be triggered when the water level is lower than the sensor after disabling the alarm). Press the up and down buttons at the same time to enable the alarm.
- Turn off the alarm beep: This device will beep an alarm when the number of speed or temperature displayed on the screen flashes twice. Press the up/down button to turn off the alarm.