| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $729.40 | $714.52 | $692.19 | $662.42 | Contact US |
SUGON 3005PM 30V/5A 150W DC Power Supply 4-Digit Adjustable Power Supply (220V) with 6 USB Outputs
$186.56
SUGON 3005PM 30V/5A 150W DC Power Supply 4-Digit Adjustable Power Supply (110V) with 6 USB Outputs
$186.56
DS100 250MSa/s 50M Mini Oscilloscope w/ Black Protective Sleeve + 2 P6100 Probes + MCX to BNC Cable
$107.95
T-800B 0-10KV High Voltage Signal Generator Cable Fault Locator for Underground and In-wall Cable
Description:
T-800B high-voltage signal generator is mainly used for the test of high resistance and flashover fault of power cable within 10KV. It can also be used with a cable fault rangefinder and a cable fault locator.
For the fault of higher-voltage cable, the use of this product should be considered according to the fault situation. Thanks to its built-in high-voltage capacitor, it can break down the cable once your cable fails. Compared with instruments with small capacitance, it is more convenient for ranging and locating.
The device has a built-in boost rectifier and discharge device. It has complete functions. It is simple to wire, and safe and convenient to operate.
Technical Parameters:
- Output voltage: 0-10kV, DC negative polarity built-in capacitor: 10F
- Working mode: single pulse/periodic pulse
- Discharge period: adjustable interval, default 5 seconds (in periodic pulse working mode); Impact energy: 500J (10kV pulse operation mode)
- Discharge device: Built-in
- Working power supply: AC single phase 220V 10%, frequency 50HZ 1HZ
- Altitude: below 4000m/13123.4ft
- Ambient temperature: 0-40°C
- Relative humidity: not more than 70% (at 40°C)
- Main unit dimensions: 380 x 280 x 240mm/15 x 11 x 9.4" (WxDxH)
- Main machine weight: 10KG/22LB
Package Included:
- 1 x Cable Fault Locator
