T16-Texture 16-Button Game Keyboard Hitbox Haute42 Fighting Game Joystick Arcade Leverless Controller

T16-Texture 16-Button Game Keyboard Hitbox Haute42 Fighting Game Joystick Arcade Leverless Controller

Description:
- This is a leverless controller made of crystal switches, which is completely white and flawless, making it irresistible. The RGB lighting effect has better transparency, allowing you to immerse yourself in the game.

Characteristics:
- Dual core ARM Cortex-M0+ at 133MHz.
- Supported by dedicated QSPI bus, up to 16MB off chip flash memory.
- Fully connected AHB crossover switch.
- Integrated 264kB on-chip SRAM in six independent groups.
- 40nm process node manufacturing, low dynamic power consumption, and low leakage.
- 1ms delay, no frame leakage rate above 95%.
- Supports firmware updates.

Compatibility:
- B: Xinput mode (for Windows/Steam)
- A: SWITCH mode
- X: for PS3 / Dinput mode (for Raspberry Pi / Android)
- Y: for PS4 mode (Compatible with PS4 games on PS5 console）
- RT: KEYBOARD mode

Input Mode:
- To change the input mode, hold one of the buttons(as shown above) as the controller is plugged in.
- Tips: This product defaults to Xinput mode, input mode is saved across power cycles.
- If there are games that do not compatible the above input modes, you can enter the Web Configurator to modify them for normal use.

Web Configurator:
- This product contains a built-in web-based configuration application which can be started up by holding START when plugging your controller into a PC. Then access http://192.168.7.1 in a web browser to begin configuration.

TURBO:
- Hold TURBO, then press the button which you need to be set for turbo function, then this button will be continuous sending while you press it, to cancel this turbo key, just repeat the previous step.
- The turbo key that set will be cleared when power off.
- These keys can be set as a Turbo key: A / B / X / Y / LB / RB / LT / RT.

RGB LED Setting:
- BACK + START + X Next Animation
- BACK + START + A Previous Animation
- BACK + START + Y Brightness Up
- BACK + START + B Brightness Down
- BACK + START + RB LED Parameter Up
- BACK + START + RT LED Parameter Down
- BACK + START + LB Pressed Parameter Up
- BACK + START + LT Pressed Parameter Down

Specification:
- Working voltage: 5V
- Link method: USB Type-C
- Product size: 296mm x 196mm x 128mm
- Supported Platforms: for pc /ps3/ps4/switch/ Android/Steam

Package Included:
- 1 x Keyboard
- 1 x Type-C Data Cable (1.5m)
- 1 x Keycap Puller
- 8 x Anti-slip Pads
- 1 x Crystal Switch
- 3 x 6mm Keycap
- 1 x User Manual