USB CNC MDK2 3 Axis TB6560 Stepper Motor Driver Board 3.5A/24V w/Interface for SD Card MPG

USB CNC MDK2 3 Axis TB6560 Stepper Motor Driver Board 3.5A/24V w/Interface for SD Card MPG

Specifications:
- Motor Type: 3 axis controller for stepper and servo motors
- Motor type: Stepper Motor
- Model Number: USB CNC MDK2 -3 Axis–Tb6560

Package Included:
- 1 x USB CNC MDK2 -3Axis –Tb6560 card
- 1 x USB cable
- 1 x CD

Description:
- 3 axis controller for stepper and servo motors    
- USB connection    
- 100 kHz maximum step frequency    
- 12 us minimum pulse width, 50% duty cycle at higher frequencies    
- 7 digital outputs on board    
- jogging keyboard support    
- 8 limit switches with shift feature    
- 5 inputs    
- MPG pendant support    
- Spindle encoder and index signal support for spindle synchronization    
- SD card support for running g-code without computer    
- control external devices with I2C and UART protocol    
- Homing procedure    
- Tool change procedure    
- Tool length sensor support    
- Sensor for capturing and measuring    
- digitizing probe support    
- Transformation matrix    
- Soft limits    
- Slave axes    
- Backlash compensation    
- API    

Features:
- USB (V2.x) from PC/Laptop running Windows XP, Vista, Windows 7, 8 or 8.1 (32 bit or 64bit)    
- Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep)    
- Controller works with most step/dir stepper and servo motor drivers available on the mark    
- buffered IO for maximum performance    
- advanced interpolation algorithms    
- start, stop, pause and resume execution of program on your machine    
- Standard RS274/NGC G-code (EMC2 and LinuxCNC compatible)    
- advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported    
- advanced G-codes - G43, G49 (Tool Length Offsets) supported    
- Advanced G-codes - G54, G59.3 (Coordinate System Origins) supported    
- tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-co    
- Profili 4-axes and 3-axes G-code supported    
- import toolpath from DXF files    
- import toolpath from PLT/HPGL files    
- import toolpath from image files    
- import toolpath from NC-Drill (Excellon) files    
- import toolpath from Gerber (RS-274X) files    
- toolpath simulation    
- automatic homing procedure    
- advanced toolchange procedures    
- automatic tool length measuring    
- export toolpath to G-code    
- export toolpath to DXF    
- SDK (software developers kit) is available    
- works on MacOS with virtual machine emulating Window

Note:
- The controller should be powered with an external power supply.
- USB CNC MDK -3 Axis –Tb6560 requires 24V DC supply.
- Power supply should be at least 200mA.
- SD card in the pictures is not included. Thank you!