| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $244.02 | $239.04 | $231.57 | $221.61 | Contact US |
Godox LC1000R 2500K-8500K LED Light Stick LED Light Wand Enables 15 FX Effects & Wireless Control
$284.05
Godox LC1000BI 2500K-8500K LED Light Stick LED Light Wand Enables 11 FX Effects & Wireless Control
$237.41
CFast to SSD Adapter NP-F970 to V-shaped Battery Z CAM E2-M4/S6/F6/F8 Multifunctional Converter
$144.86
XB-52DL Superior Low-Profile Ball Head Panoramic Tripod Head Load 60KG with Clamp DLC-60
Description:
Low center of gravity, high locking strength ball head.
Durable type-III hard anodized finish ensures its resistant to corrosion and abrasion.
Details:
- The locking mechanism moves form the bottom to
the side of the ball, and the whole center of gravity lowers more than
15% for better stability.
- Aerospace grade aluminum material with superb finish.
-
Friction Adjustment: To set the friction, either remove your camera
from tripod or hold it in place. 1. Start with Main Knob fully
tightened. 2. Then use your thumb or optional friction tool. FT-01 to
tighten the Friction Knob fully clockwise, and then back it off by
90-180 degrees. This will set the friction and the amount of rotation of
the Main Knob. 3. Now fine tune the resistance and amount of rotation
of the Main Knob by turning the Friction Knob clockwise in small
increments until you set your preferred amount of resistance and
rotation of the Main Knob.
- Loosen the lock-knob at the base and the base can rotate in 360 degrees.
- Compatible with T2C40C tripod dedicated L-bracket.
Caution:
When
When there is camera loaded on the ball head, and the main knob is
loosened up, DO NOT loosen the friction knob at the same time, otherwise
the ball head will drop all of a sudden and may cause damage to the
camera.
Note: Tripods and cameras are not included, for demonstration purposes only.
