|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$139.09||$136.25||$131.99||$126.32||Contact US|
ZITAY External Battery Replace F970 Battery Plate For SLR Using Battery Base For Sony F550/970/750
This product is suitable for cameras using F550/970/750/ and other battery base. If external battery for other camera models are needed, please contact us.
It can be used as power supply for SLR and monitor at the same time.
Red charger indicator means that it is charging. Green indicator indicates that it is fully charged and power supply will be cut off automatically.
1. Using 6pcs high-capacity NCR18650 batteries for Panasonic, a single capacity of 3400mAH, a total capacity of 3.6V 20400mAH. Why the product says 10200mAH? because the battery is three parallel and two strings, output 7.2V, according to the industry standard label. The capacity is equivalent to 10 original NP-FW50 batteries.
2. The main body adopts CNC machining of aluminum alloy for aviation parts, and the surface treatment adopts hard anodizing process. Strictly tailored and meticulously crafted, it embodies the craftsman spirit.
3. There are 3 parallel 1/4 screw holes at the bottom, and the installation and fixing methods can be varied. No more battery bases, no more battery clips.
4. With 4 parallel DC socket outputs, it can supply power to 4 devices at the same time.
5. The circuit principle is exactly the same as most SLR batteries (such as LP-E6/NP-FW50, etc.). Both sets of batteries are connected in series and a protection board is added. The structure is simple, safe and reliable, with the highest efficiency and almost no loss. The power displayed by the SLR camera is the true power of the battery.
6. Fast charging. Due to the simple battery series connection method, the internal complicated buck-boost process is reduced. The charging current can be very large. The standard charger is 8.4V/3A, and the charging power reaches 25W. It can be fully charged over 3 hours.
7. Touch-type power indicator, fully sealed and waterproof structure.
8. The battery has overcharge protection, over-discharge protection, overcurrent protection, short circuit protection, overvoltage protection, perfect and comprehensive protection, no need to worry about the battery being damaged.
- Circuit structure: three parallel and two series;
- Processing method: CNC
- Core type: Panasonic NCR186
- 1 x Set of External Battery
Note: Other items pictured are not included, for demonstration purposes only.
The usage method is shown in the figure below. Different SLR camera battery compartments have different outlet positions. Generally, they are more hidden and covered with rubber covers. Insert the DC plug of dummy battery into the external battery.
Instructions for Use:
- The external battery has four DC sockets, plug the charger's DC plug into any DC socket
- The external battery charging and discharging sockets are shared. Like the original SLR battery, the charging and discharging interfaces of the original SLR battery are shared.
- It is normal for the charger to heat up during charging, and the temperature will automatically drop when fully charged. Because the charging power is high, heat is normal, and ordinary laptop chargers will also heat up during charging.
Note: Power cord or dummy battery is distributed according to the model of your monitor. Please tell us your monitor model while purchasing. Thank you!