ZK-DAM H1 Microphone Preamplifier Board Mic Preamp with Shell Bluetooth & Decoding for USB Drive

ZK-DAM H1 Microphone Preamplifier Board Mic Preamp with Shell Bluetooth & Decoding for USB Drive

Features:
- Microphone preamp board
- Supports Bluetooth and decoding for USB drive
- With two mic interfaces
- Digital reverb
- Dynamic howling prevention
- Virtual bass
- Supports a pair of TWS speakers
- Powered by DC 8-36V

Product Parameters:
- Product name: Mic preamp board with Bluetooth and decoding for USB drive
- Product model: ZK-DAM H1
- Input voltage: wide voltage 8-36VDC. AC cannot be input
- Bluetooth chip: BP1048B2, Bluetooth 5.0
- Bluetooth decoding format: SBC and AAC
- Bluetooth distance: 15m/49.2ft
- USB drive decoding format: MP3, WAV, FLAC, APE bit rate is less than 1500kbps
- Microphone interface: Dual 6.35mm microphone interface
- Power interface: DC5.5-2.1 female socket or terminal block (choose one of the two)
- Audio output interface: 3.5MM headphone jack or XH2.54-3P socket (choose one of the two)
- Working mode: Bluetooth, AUX and USB drive/sound card
- Status of indicator light: In USB drive and AUX mode, blue light will flash slowly. After Bluetooth is connected, the indicator light will stay on. When there is no connection, the blue indicator will flash super slowly. When TWS is enabled, a flashing red light indicates that it is searching for pairing. Red light staying on indicates left TWS channel, and a slow red light indicates TWS right channel.
- Mode priority: Plugging in a USB drive or AUX connection can disconnect the Bluetooth. After the power is off, the working mode will be remembered. Bluetooth mode cannot be found in USB drive or AUX mode.
- Net weight (with shell): 134g/0.3lb

Package Included:
- 1 x Set of Microphone Preamplifier Board

Note:
- The shell needs to be assembled by yourselves.
- Power supply, USB cable and audio cables are not included in the package.
- It does not support WUZHI AUDIO APP.

Packaging Details:
- G.W.: 0.16kg