• FPV 5.8G 200mW TS58200 RC5808 Transmitter Receiver + Cloverleaf + 11dBi Antenna
  • FPV 5.8G 200mW TS58200 RC5808 Transmitter Receiver + Cloverleaf + 11dBi Antenna
  • FPV 5.8G 200mW TS58200 RC5808 Transmitter Receiver + Cloverleaf + 11dBi Antenna
  • FPV 5.8G 200mW TS58200 RC5808 Transmitter Receiver + Cloverleaf + 11dBi Antenna

FPV 5.8G 200mW TS58200 RC5808 Transmitter Receiver + Cloverleaf + 11dBi Antenna

Availability: Out Of Stock

  • Price:$86.90
  • Price in reward points: 869 Reward Points: 9
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $85.16 $83.42 $80.82 $77.34 Contact US
Quantity:

FPV 5.8G 200mW TS58200 RC5808 Transmitter Receiver + Cloverleaf + 11dBi Antenna

Specification:

Transmitter:
 1. DC in range: 12V/150mA(7.0~15V)
 2. Operating temperature: -10~+85°c
 3.High power output :23dBm
 4.Low harmonic radiation
 5.Eight channel launching

Receiver:
 1. video output:1Vp-p 75 ω
 2.Audio Output:1Vp-p 600 ω
 3. Power supply:DC 12V
 4. Operating temperature: -10~+50°c
 5. Dual AV output
 6. Receive frequency:5725-5865MHz


Channel frequency:
  CH1 5.705/ CH2 5.685/ CH3 5.665/ CH4 5.645
  CH5 5.885/ CH6 5.905/ CH7 5.925/ CH8 5.945 GHz

11 dbi descriptions:
This light-weight broadband frequency (5.6 to 5.9GHz) with high gain (11dBi) panel antenna
is a great passive Gain device to extand the transmission of any 5.8GHz wireless RF and Digital signal to a very long range.  

This antenna works with  FPV  5.8G 200MW transmitter,  Range will be up to above 3KM
This antenna works with  FPV  5.8G 500MW transmitter,  Range will be up to above 6KM
 
Specifications:
- Frequency:5600-5900MHZ
- Gain: 11dbi
- Horizontal radiationlobe:45degree
- Vertical radiationlone:30degree
- Standing wave ratio:< 2.0
- Input impedance: 50ohm
- Polarize way:Vertical
- Max.Power:50W
- Connector:RP-SMA

Applications:

- For Long Distance FPV Wireless Video Transmission
- WiMax, 802.11a WiFi Networks, and 802.16 WiMax Networks
- Public Wireless Hotspot
- Wireless LAN Systems

Cloverleaf descriptions:
Connector: RP-SMA
Cable: RG316

3 lobes, used for the transmitter part of an FPV RC airplane or multicopter platform.
4 lobes, used for the receiver part of an FPV RC airplane or multicopter platform.
This type of antenna is superior to the standard antennas that come with the FPV transmitters and receivers.
Has the RP-SMA female connector (hole in the middle with threads on the inside of the barrel) which directly screws on to the transmitter and receiver.
Works great with the 5.8Ghz 200mw, 400mw, and 500mw transmitters on the market, and is far better than the stock antennas.
Since it is a circularly polarized antenna, the orientation will not affect video quality. Range is also be much greater.

Package includes:
1x Receiver
1x Transmitter
2 X 5.8G antennas
1 X Power cable for transmitter
1 X Power cable for receiver
1x Connector and cable set
1x Instruction book
1* Cloverleaf transmitter antenna
1* Cloverleaf receiver antenna
1* 5.8GHz 11dBi high gain Panel Antenna

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha