| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $22.73 | $22.26 | $21.57 | $20.64 | Contact US |
AXera PI Zero Module 5MP AI-ISP Camera Module Designed with SoC Chip AX620Q+SC450AI Image Sensor
$67.98
0.5-inch 1024X768 OLED Driver Board High Quality Circuit Board for V760A-5 Wearable Head Mounted Display
$40.24
1PCS SFP+ Dual Mode Optical Module Small Form-factor Pluggable Transceiver Support 10Gbps Transmission with LC Interface
$26.09
1 Channel Relay Module SMS GSM Remote Control Switch STM32F103CBT6 For Greenhouse Oxygen Pump
Description:
- Voltage: 6V-18V, when using 6V Power supply, the current need above 1.5A
- Relay interface: Using 250V 10A relay, you can directly operate most of the electrical appliances on the market.
- SIM Card Socket: Insert SIM card when system powered off. (In China, please use mobile or Unicom card).
- LED interface: There are three LED lights named D3 D5 D6 (D5 is close to the positioning hole, D6 is close to the antenna interface). LED indicator state corresponds to the equipment working conditions are as follows, each column is one state.
Mode Configuration:
Format: *code*$00000N $, N=1, 2, 3, 4. If you want to set this controller work at 1 mode, send the SMS: *123456*$000001$. The device will reply, content is: SYS Mode: 1 Set OK!
Command:
- Relay On command: CMON, after successful setup, the device will reply SMS is: ON Set OK! For example, send the SMS: CMON. Relay status will be saved.
- Relay Off command: CMOF, after successful setup, the device will reply, SMS Content is: OFF Set OK! Send the SMS: CMOF. Relay status will be saved.
- Relay on for only 1-2 second command: CMDD, After successful setup, the device will reply, SMS Content is: Dian Dong Set OK! For example, send the SMS: CMDD. Relay status will not be saved.
- Relay on for 1-99 minute command: CMSEONTIME(2 bit time), after successful setup, the device will reply, SMS Content is: ON Set OK! TIME ** MIN! The timing range is 1-99 minutes. If you want to control Relay On for 1 minute, send the SMS: CMSEONTIME01. Relay status will not be saved.
- System status query instruction: CMCH. For example, sends the SMS: CMCH
Remote control:
You can control your home devices even if you are in the office.
Application:
Farmland irrigation /Greenhouse / Server room / Pet feeding / Oxygen pump / Roller shutter
Note:
1 2 3 mode is phone mode, you cannot use CHCH CMON CMOF command, you need set 4 mode, 4 mode is message mode, send the SMS: *123456*$000004$ to set the board on 4 mode, you can use below command
Package Included:
- 1 x 1-Channel Relay Module with GSM Antenna
Q&A:
Q: What current consumes in rest mode?
A: 100ma
