18650 Lithium Battery Capacity Tester Meter Battery Internal Resistance Tester Module w/ Type-C Port

18650 Lithium Battery Capacity Tester Meter Battery Internal Resistance Tester Module w/ Type-C Port

Features:
- It can measure single-channel internal resistance and capacity;
- It supports charging, and up to 9 charge and discharge cycles are supported in automatic mode
- Stop discharge voltage is adjustable in 11 steps, i.e. 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V and 3.5V
- Using DC two-wire method to test internal resistance
- Chinese and English can be switched
- The maximum charge and discharge current is about 1A

Attention:
- During use, charging and discharging process will generate local high temperature, please ensure that the use of the environment is open and uncovered. It is better if a fan can be added for cooling.
- In order to ensure that the battery clamps firmly, 18650 battery holder using compact battery holder for flat battery measurement!

Technical Parameters:
- Working power supply: DC5V external power supply or 18650 battery (both of them should be prepared by yourself)
- Applicable batteries: Suitable for batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and charging at 4.2V
- Power supply interface: Type-C interface. Power cable should be prepared by yourself (C-port mobile phone cable)
- System language: Chinese and English
- Test quantity: 1-way charging and discharging measurement (right battery only)
- Internal resistance measurement: supported, using DC two-wire method to test internal resistance
- Charging function: supported, 1-way program control for up to about 1A charging; 1-way hardware control with a maximum charge of about 0.5A
- Discharge function: Supported, only 1 channel supports a maximum of about 1A discharge, and it will automatically stop when the condition is met
- Automatic charging and discharging: Supported. The battery is fully charged at the end of automatic mode (stop voltage set to 2.8V or above)
- Cyclic charging and discharging: supported, adjustable for 1-9 cycles
- Status prompt: Supported
- Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V and 3.5V
- Discharge current: Two-way resistors, up to about 1A current, non-adjustable, and independent modification not supported
- Charging voltage: controlled by a dedicated battery charging chip, with a maximum charge of about 0.5A/1A, and a full charge voltage of 4.2V
- Power off saving: only save the set parameters, not the measurement data
- Product net weight: 80g/0.2lb
- Product size: 110 x 88 x 30mm/4.3 x 3.5 x 1.2"

Package Included:
- 1 x Battery Tester

Note:
- Battery is not included in the package.

User Manual:
https://www.banber.com/banber/63f08fc7b2c1a900078b9784

Packaging Details:
- Package size: 153 x 100 x 42mm/6 x 3.9 x 1.7" (corrugated paper box)
- G.W.: 0.15kg/0.3lb