200-300W 220V to 12V Hydrogen Gas Generator (Low Gas Production) Applied to Metal Heating Processing

200-300W 220V to 12V Hydrogen Gas Generator (Low Gas Production) Applied to Metal Heating Processing

Product Principle:
Hydrogen gas generator features high efficiency, easy maintenance and good heat dissipation. Electrolysis of water will generate hydrogen and oxygen. Hydrogen and oxygen will generate water after ignition, and no pollution is generated in this process. After the liquid falls, you can add water, and the only thing that consumes is electricity. Unlike ordinary gas, solid and liquid fuels, there is no carbon dioxide produced in the heating process, nor is there insufficient combustion, nor will there be by-products such as burned black and carbon ash.

The main structure of the product adopts transparent acrylic, and the reaction process is intuitive and clear, which is convenient to view the remaining solution and convenient for users to explain the principle and process. It can be used in teaching, glass heating processing, jewelry heating processing, hydrogen and oxygen welding, thin metal cutting and all kinds heating.

Features:
- Small volume
- Simple structure
- Durable and safe to use
- No pollution is generated
- With anti-tempering protection
- Real 304L stainless steel
- 12V 460W power supply

Specifications:
- Item name: Hydrogen Gas Generator
- Total weight: 6-8kg/13.2-17.6lb
- Size: 20 x 30 x 35cm/7.9 x 11.8 x 13.8"
- Voltage: 220V to 12V
- Power: 200-300W

Package Included:
- 1 x Hydrogen gas generator
- 1 x Power cable
- 1 x Flame gun
- 1 x Electrolyte (sodium hydroxide)

Attention:
After receiving the goods, be sure to contact customer service for instructions. Please operate according to the electronic manual.

Read Before Purchasing:
1.If there is water inside the product you receive, this is normal, because the item has passed sealing tests before delivery.
2. Be sure to wait for more than half a minute before igniting to prevent explosion caused by tempering.
3. Do not close the valve of the flame gun after power-on. If you need to close the valve, be sure to close the gun valve first and then disconnect the power immediately.
4. Due to the extremely high temperature of the burning gas, do not touch the gas with your hands.

How to Use It?
1. Dissolve sodium hydroxide in water to form a saturated solution.
2. Pour the liquid into the reactor along a copper tube, and the height of the liquid is about 3/5.
3. Screw on the copper pipe and add more than 2/3 of the water to the acrylic tube next to it.
4. Open the flame gun valve.
5. Wait for half a minute to exhaust the air.
6. Ignite.
7. If you need to shut down the device, please turn off the flame gun first and then turn off the power.