200-300W Dry Oxygen Hydrogen Gas Generator Large Gas Output for Metal Heating Processing Welding

200-300W Dry Oxygen Hydrogen Gas Generator Large Gas Output for Metal Heating Processing Welding

Principle:
It is a dry hydrogen and oxygen gas flame generator, featuring high efficiency, high gas production, easy maintenance and good heat dissipation. Electrolysis of water produces hydrogen and oxygen, and hydrogen oxygen ignites to generate water, and no pollution is produced in this process. After the liquid drops, you can add water, and the only thing that is consumed is electricity.

The main structure of the product adopts transparent acrylic design, therefore, the reaction process is intuitive and clear, and the remaining solution is monitored in real time.

Application Scenarios:
It is suitable for teaching, glass heating processing, jewelry heating processing, hydrogen and oxygen welding, thin metal cutting and various heating.

Features:
- Compact size and high gas productivity
- Transparent acrylic structure makes it easier to use and monitor
- Safe and durable to use
- With any pollution generated
- Using genuine 304i stainless steel
- 12V 460W high-power power supply
- Dry hydrogen and oxygen generator structure

Specifications:
- Item name: Hydrogen Gas Generator
- Total weight: 6-8kg/13.2-17.6lb
- Size: 20 x 30 x 35cm/7.9 x 11.8 x 13.8"
- Voltage: 220V to 12V
- Power: 200-300W

Package Included:
- 1 x Main Unit
- 1 x Power Cable
- 1 x Flame Gun

Note:
- Electrolyte, odium hydroxide, is required. It is not included in the package, please prepare it by yourself.
- Tempering valve is not included.

Read before purchasing:
1. It is normal for the received product to have water inside, because we will conduct a seal test before shipment.
2. Be sure to wait more than half a minute before igniting to prevent explosion caused by tempering.
3. Do not close the spray gun valve after power-on. If it needs to be closed, be sure to close the gun valve first and disconnect the power immediately
4. The burning gas temperature is extremely high and the gas should not be touched by hand.

How to use?
1. First, dissolve sodium hydroxide in water to form a saturated solution.
2. Pour the liquid down the copper tube into the reactor, the height of the liquid is about 3/5.
3. Screw on the copper tube and add more than 2/3 of the water to the acrylic tube next to it.
4. Open the gun valve.
5. Wait half a minute for power on to drain the air.
6. Ignite.
7. If it needs to be shut down, be sure to turn off the flame gun before turning off the power.