3D Scanner Unassembled 3D Laser Scanner DIY Kit Supports Phones and Cameras for Maker Projects

3D Scanner Unassembled 3D Laser Scanner DIY Kit Supports Phones and Cameras for Maker Projects

Objects that are easy to scan:
1. Weight: less than 0.5KG/1.1LB
2. Size: smaller than 10 x 10cm/3.9 x 3.9"

Objects that are difficult to scan:
1. Transparent objects such as glass and organic plastics
2. Glowing and strongly reflective objects

Objects that cannot be scanned:
1. Objects: larger than 10 x 10cm/3.9 x 3.9"
2. Moving objects
3. Weight: over 0.5KG/1.1LB

Compatible Cellphones:
- For Android phone
- For iOS phone

Supported Cameras:
- For Canon EOS: 350D, 450D, 550D, 600D, 700D, M, D5 Mark II, D6 and D7
- For Minolta: F300
- For Nikon: D3000, D7000, D40, D50, D80 and D90
- For Olympus: E-3, E-300, E-410 and E-510
- For Pentax: K10, K100D Super, K200D, K7, S1, WG-1 and X5
- For Sony: Alpha 330, Alpha 380, Alpha 580, CX730 and NEX 5N

Package Included:
- 1 x Uno mainboard
- 1 x Uno mainboard shield
- 2 x A4988 stepper drivers
- 1 x LCD I2C 20x4
- 1 x Bluetooth remote shutter control for smartphones
- 1 x 940nm infrared-LED for camera
- 2 x Stepper motors
- 1 x Power supply 12V/2A (5.5-2.5mm plug)
- 1 x Set of aluminum
- 1 x Set of acrylic
- 1 x Set of screw and nuts
- Other Parts

Note:
- This is a desktop-grade 3D scanner, different from an industrial-grade 3D scanner. Its scanning effects depends on the object used, environment, and light, so it is recommended to scan in our constant light studio.
- Assembling is needed.