8 Channel WiFi Relay Control Switch Network Relay Phone Remote Control ZKB-WTR88

8 Channel WiFi Relay Control Switch Network Relay Phone Remote Control ZKB-WTR88

Product introduction:
- USR-IO88 is our company's new 8 inputs and 8 outputs of control equipment,users can control devices at any time under three modes of Wifi,direct connection and remote connection.
- As for output,all three relay terminals are extracted and used by users;as for input,web page configuration mode are provided.
- Users can switch freely between pure input mode and controlled relay mode,derivation input part we provide web page configuration mode,can be in pure input mode,arbitrary switching between control relay mode.Product control software support platforms,such as Windows,IOS,android and users can control device remotely and conveniently.

Feature:
- Optocoupler Isolation,8 in 8 out,built-in watchdog
- Voltage:<=36V
- Temperature:-40~85 degrees
- Power input voltage protection
- RS485 interface
- Network interface+WiFi
- Support MODBUS RTU
- Local control/mobile phone control

Parameter:
- Model:ZKB-WTR88
- Size:216.89x138.09x28.34mm
- Working voltage USR-IO88:DC 12V/15~60V
- Power consumption:12V:Max:7W;15~60V:MAX:8W
- Operating temperature:-40~85°C
- Storage environment:Temperature:-40~85°C;Humidity：5%~95%RH
- COM interface input voltage:Relay voltage 10A 277VAC/28VDC;12A 125VAC

Function Specification:
1.TCP interface,control switch through local area and remote network
2.8 access relay outputs under the open/close condition at all times
3.8 access configurable inputs which can report the input state
4.Extract RS485 interface.Users can extend device conveniently.
5.Double net gapes and support LAN and WAN
6.Support the password vertification and realize the safety control of the device
7.Each relay access has 6 accesses switch function at certain times.
8.Input light-coupled isolation and isolate the interference of the outside
9.Output the latch and prevent the relay from the interference
10.The controlled software supports 5 platform: Windows,IOS,Android,Webpage,you can choose freely
11.Restore the factory setting and return to the original state

Wiring Schematic Drawing:
1.Power supply 12V,15V to 60V select an input.
2.The product is a single switch control,each relay control only a line.
3.Each relay are divided into two contacts of opening and closing at all times.Users can choose freely.
4.The internal circuit of 6 accesses relay are unconnected.Users provide each relay with the power independently.
5.The maximum power of controlled equipment:
DC:28V/10A
AC:277V/10A 125V/12A

Package List:
- 1 x 8 Channel Relay
- 1 x 12V Power supply
- 1 x WiFi antenna
- 1 x Cord