| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $28.43 | $27.85 | $26.98 | $25.82 | Contact US |
AXera PI Zero Module 5MP AI-ISP Camera Module Designed with SoC Chip AX620Q+SC450AI Image Sensor
$67.98
0.5-inch 1024X768 OLED Driver Board High Quality Circuit Board for V760A-5 Wearable Head Mounted Display
$40.24
1PCS SFP+ Dual Mode Optical Module Small Form-factor Pluggable Transceiver Support 10Gbps Transmission with LC Interface
$26.09
8MP Camera Module NoIR Camera V2 Expansion Board Camera Module Board 1080P for Raspberry Pi
Description:
Raspberry Pi Camera Module v2 is specially customized for Raspberry Pi with a high-quality 8-megapixel Sony IMX219 sensor expansion board. It has a fixed-focus lens, which can reach 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640 x 480p60/90 camera function. The expansion board is suitable for Raspberry Pi through the small slot on the surface of the board, and uses a special CSI interface which is specially designed for the camera.
Specification:
Pixel: 8 million physical pixels, can reach 3280 x 2464 pixel static pictures
Size: 25mm x 23mm x 9mm
Weight: about 3g
Compatible range: compatible with all versions of Raspberry Pi
Cable: 15-pin ribbon cable
Sensor: Sony IMX2 19PQ CMOS image sensor
Filter: None
Support video: 1080p30, 720p60 and 640 x 480p60/90 video
Support system: the latest version of Raspbian system supports Raspberry Pi Camera v2
Provided: connect to the Raspberry Pi board via a short ribbon cable
Manual focus: support manual focus
Features: can shoot in low-light environments (additional infrared photosensitive equipment is required)
Connection Steps:
(The position of the connector: a 90° vertical connector, the contact side of the HDMI port is facing the HDMI port when connected)
Step 1: RPi firmware and rasp-config have been updated for the camera, please execute apt-get update; apt-get upgrade。
Step 2: Select camera in rasp-config, start the camera driver in RPi firmware, and restart。
Step 3: Use command line programs raspivideo and raspistill to operate the camera and capture video clips or images。
Step 4: The captured video clip needs mplayer to play。
Package List:
-1 x Camera Module
-1 x Ribbon Cable
Note:
-When assembling the shell, first tear off the acrylic protective film.
-The screw holes on the acrylic board may have residue or blockages, please remove them.
-Not include the camera.
![XIAOR GEEK TH Robot Car Kit for Raspberry Pi [Car + Starter Kit + 4B 4G Motherboard + A2 Robotic Arm]](https://www.thanksbuyer.com/image/cache/data/202208/77595/1660267639-1-200x200.jpg "XIAOR GEEK TH Robot Car Kit for Raspberry Pi [Car + Starter Kit + 4B 4G Motherboard + A2 Robotic Arm]")
![XIAOR GEEK TH Robot Car Kit for Raspberry Pi [Car + Starter Kit + 4B 4G Motherboard + A1 Robot Arm]](https://www.thanksbuyer.com/image/cache/data/202208/77594/1660267625-1-200x200.jpg "XIAOR GEEK TH Robot Car Kit for Raspberry Pi [Car + Starter Kit + 4B 4G Motherboard + A1 Robot Arm]")
