• Arduino LM35 Linear Temp Sensor Analog Linear Temperature Electronic Brisk
  • Arduino LM35 Linear Temp Sensor Analog Linear Temperature Electronic Brisk
  • Arduino LM35 Linear Temp Sensor Analog Linear Temperature Electronic Brisk
  • Arduino LM35 Linear Temp Sensor Analog Linear Temperature Electronic Brisk

Arduino LM35 Linear Temp Sensor Analog Linear Temperature Electronic Brisk

Availability: Out Of Stock

  • Price:$5.20
  • Price in reward points: 52 Reward Points: 1
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $5.10 $4.99 $4.84 $4.63 Contact US
Quantity:
  This product has a minimum quantity of 2

Arduino LM35 Linear Temp Sensor Analog Linear Temperature Electronic Brisk

Description:

- LM35 has a very high precision and comparably wide linear working range, this component's output voltage is in proportion with temperature linear. 1 degree raise, output voltage will increase 10mV. LM35 is a half conductor temp sensor, no need of external calibration or fine-tuning, can provide ±1/4℃ indoor temp precision.
- LM35 Linear Temp Sensor can be pluged at Arduino Sensor Shield V5.0 sensor expansion board or  Arduino MEGA Sensor Shield V1.0 sensor expansion board, or connect with all kinds of single chip engine develop board, robot controller.

Parameters:
- Can be directly debugged under centigrade degree
- +10.0mV/℃ linear calibration factor
- Guarantee 0.5℃ precision(at 25℃)
- Rated temp range: -40℃ to +110℃
- Wide working temperature: 4V-30V
- Low power consumption, smaller than 60uA
- At static air, self-heat effect is low, smaller than 0.08℃ self-heating
- Non-linear only ±1/4℃
- Output resistance, only 0.1Ω under 1mA  current
- Pin description: 1.power supply negative GND 2.power supply positive VCC 3.signal output S

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha