BCNet-A Ethernet Module V1.0 (9-Pin Port) PLC to Modbus TCP Ethernet Communication Processor for Mitsubishi A-series

BCNet-A Ethernet Module V1.0 (9-Pin Port) PLC to Modbus TCP Ethernet Communication Processor for Mitsubishi A-series

Description:
- BCNet-A is an economical Ethernet communication processor, which is designed to meet the increasing needs of factory equipment informatization (equipment Network monitoring and production management). It is used for Ethernet data acquisition for Mitsubishi A-series PLC, which is very convenient to build a production management system.
- BCNet-A V1.0: integrated 1 x DSUB9 male port with a 25Pin to 9Pin communication cable; when connected to the Ethernet, it occupies the 25-pin port of the PLC and does not support simultaneous connection to the touch screen.

Features:
- Installed on a 35mm guide rail, COM1 port is directly connected to the PLC programming communication port. BCNet-A requires an external 24VDC power supply.
- Integrated WEB server, device parameters can be set and diagnostics can be run through web pages, and login protection passwords can be set to prevent tampering with configuration data.
- Adapt the communication parameters for Mitsubishi PLC programming port without the need for additional settings.
- Integrated Modbus TCP server, supports FC1, FC2, FC3, FC5, FC6, FC16, and the Modbus data area is automatically mapped to the data area for Mitsubishi PLC.
- ModbusTCP mode can be used to realize advanced language programming (such as VB, VC, C #, etc.), realize data communication with PLC, and facilitate the development of production management system.
- SCADA (upper configuration software) that supports OPC channels communicates with PLC in OPC mode.
- Supports up to 6 PCs simultaneously collecting PLC data.

Specification:
- Status display: Pwr, COM1, Link
- Configuration software: for MCGS, for KingView, for FORCECON, etc.
- OPC software: for KepWare OPC
- Diagnostic and parameter setting tool: IE browser, 192.168.1.178 by default
- Power supply: external 24VDC
- Voltage type: 24VDC/100mA
- Working temperature: 0 ~ 60℃
- Working humidity: 90% (non-condensing)
- Installation method: 35mm guide rail
- Size: 90 x 24 x 65mm
- Weight: 120g

Ethernet Interface: IEEE 802.3 compatibility, Link/Active indicator, line sequence adaptation, support for Auto-MDIX
- Interface type: RJ45 female socket
- Transmission speed rate: 10/100Mbps
- Supported protocol: for MELSOFT, for MC
- TCP connections: 6

X1 Interface (for PLC): RS232
- Interface type: DSUB9
- Transmission speed rate: 9.6K, 19.2K
- Supported protocol: for Mitsubishi A programming port

Package Included:
- 1 x Ethernet Module
- 1 x 25P-9P Communication Cable