BCNet-CJ Ethernet Module CJ1M/CJ2M to FINS TCP/UDP/Modbus TCP Data Acquisition Ethernet Communication Processor for OMRON

BCNet-CJ Ethernet Module CJ1M/CJ2M to FINS TCP/UDP/Modbus TCP Data Acquisition Ethernet Communication Processor for OMRON

Description:
- BCNet-CJ is an economical Ethernet communication processor, which is designed to meet the increasing needs of factory equipment informatization (equipment Network monitoring and production management). It is used for Ethernet data acquisition for Omron CJ1M/CJ2M/CS1/CG1/NX1P series PLCs, which is very convenient for building a production management system.
- BCNet-CJ adopts a plug and play design, which does not occupy the PLC communication port. The programming software/upper computer software monitors PLC data through Ethernet, while the touch screen can communicate with the PLC through a multiplexing interface. BCNet-CJ supports the vast majority of SCADA software in the industrial control field, and supports for Omron FINS TCP/UDP Ethernet protocol and Modbus TCP.

Features:
- Plug and play, the module is directly plugged into the DB9 of CJ1/CJ2/CS1/CG1/NX1P, without the need for external power supply, and the expansion port can be connected to the touch screen at the same time.
- Parameter settings and running diagnostics can be performed on devices through a WEB server or the configuration diagnostic tool BCDevice.
- Automatic identification of PLC model, automatic matching of PLC and HMI serial parameters, without the need for additional configuration.
- Realize Ethernet communication with programming software CX Programmer for Omron.
- Supports for FINS/UDP, for FINS/TCP Ethernet protocol communication, and supports access to upper computer software (for KingView, for MCGS, for Force Control, for KepWare OPC servers, etc.).
- Integrated Modbus TCP server, supporting FC1, FC2, FC3, FC5, FC15, FC6, FC16, with Modbus data area automatically mapped to PLC data area.
- Supports BCNetTCP/IP transparent protocol communication.
- With FINS communication protocol or transparent transmission, advanced language (such as VB, VC, C #, etc.) programming can be realized, and data communication for Omron PLC can be realized to facilitate the development of production management system.
- SCADA (upper configuration software) that supports OPC channels communicates with PLC in OPC mode.
- It can simultaneously implement CX Programmer, FINS/TCP, FINS/UDP, BCNetTCP transparent transmission, and ModbusTCP connection methods. Supports the connection of 10 upper computers.
- Support firmware updates on the user side through Ethernet.

Specification:
- Status display: Pwr, Bus
- Programming software: for CX-Programmer
- Configuration software: for MCGS, for KingView, for FORCECON, for IFIX, for INTOUCH, etc.
- OPC software: for KepWare OPC
- Diagnostic and parameter setting tool: IE browser, 192.168.1.178 by default, BCDevice
- Power supply: communication port or external 24VDC
- Voltage type: 24VDC/100mA
- Working temperature: 0 ~ 60℃
- Working humidity: 90% (non-condensing)
- Installation method: plug and play
- EMC: 2014/30/EU
- Anti-vibration: 4.5mm/30Hz/10Min
- ESD: 6KV
- Size: 65 x 30 x 17mm
- Weight: 60g

Ethernet Interface: IEEE 802.3 compatibility, Link/Active indicator, line sequence adaptation, support for Auto-MDIX
- Interface type: RJ45 female socket
- Transmission speed rate: 10/100Mbps
- Supported protocol: for FINS/TCP, for FINS/UDP, for Modbus TCP, for BCNet TCP, etc
- TCP/UDP connections: 10

PLC Interface: RS232
- Interface type: DSUB 9-Pin Male
- Transmission speed rate: 9.6K, 19.2K, 38.4K, 57.6K, 115.2Kbps
- Supported protocol: FINS

HMI Interface: RS232
- Interface type: DSUB 9-Pin Female
- Transmission speed rate: 9.6K, 19.2K, 38.4K, 57.6K, 115.2Kbps
- Supported protocol: FINS

Package Included:
- 1 x Data Acquisition Module