• CC2530F256RHAR cc2530 Zigbee Wireless Module Zigbee Module Development Board Attached to the Antenna
  • CC2530F256RHAR cc2530 Zigbee Wireless Module Zigbee Module Development Board Attached to the Antenna
  • CC2530F256RHAR cc2530 Zigbee Wireless Module Zigbee Module Development Board Attached to the Antenna

CC2530F256RHAR cc2530 Zigbee Wireless Module Zigbee Module Development Board Attached to the Antenna

Availability: In stock, usually dispatched in 1 business day

  • Price:$16.73
  • Price in reward points: 167 Reward Points: 2
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $16.40 $16.06 $15.56 $14.89 Contact US
Quantity:

CC2530F256RHAR cc2530 Zigbee Wireless Module Zigbee Module Development Board Attached to the Antenna

Introduction

- Core2530 to CC2530F256 is a core control chip board.

CC2530F256RHAR core parameters:
- Working frequency: 2.4GHz
- 16 transmission channels, depending on the environment for reliable communication channel switch
- Wireless transmission speeds up to 250kbps
- High-performance, low-power 8051 microcontroller core
- Adapt 2.4GHz IEEE 802.15.4 RF transceiver
- Wide supply voltage range (2.0 ~ 3.6V)
- Watchdog, battery monitor and temperature sensor
- It has 8 inputs 8 to 14-bit ADC
- 2 supports a variety of serial communication protocol USART, 1 infrared generating circuit
- A general-purpose 16-bit and two 8-bit timers
- Advanced Encryption Standard (AES) Coprocessor
- 21 general purpose I / O pins, two with 20mA current sink or current supply capability

Core2530 core parameters:
- Master chip: CC2530F256RHAR
- Communication distance: Can communication: more than 350 meters; reliable communication: more than 250 meters; automatically reconnect: more than 120 meters (Work environment: open area)
- Working frequency: 2.4GHz
- Operating voltage: 2.0V-3.6V
- Temperature range: -40 ~ 85
- Baud rate: 38400bps (default), the baud rate can be set to other
- Dimension: 26mm x 27mm (PCB)
- Interface: All I / O interface
- Interface Pitch: PIN pin spacing: 2.54mm; sides pin pitch 22.86mm (9x2.54)
-  Antenna: Using 2.4G, 2DB omnidirectional antenna
- Node: can be configured as Coordinator, Router, EndDevice (factory default: Router)

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha