Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $181.22 | $177.52 | $171.98 | $164.58 | Contact US |
DFRobot ID01 UHF RFID Reader USB Remote Read-Write Module 200mA EPC G2 for Wireless Meter Reading Identification
Product introduction:
UHF RFID MODULE - USB distance RFID reader MODULE is a non-contact UHF remote IC card read/write MODULE.Widely used in vehicle monitoring, remote control, home security systems, wireless meter reading, entrance guard system, village pager, industrial data acquisition system, wireless label, identification, non-contact RF smart card, small wireless data terminals, security and fire prevention systems, wireless remote control system, meteorological and hydrological monitoring, biological signal acquisition, robot control, etc.
Users can also our another kind of low power consumption (NFC module) using RFID equipment, through the connection with the and RS485 network, rapid prototype build project.Package with three RFID tags, more choice, please check our classification of RFID.The USB/RS232 / RS485 / TTL protocol converter.
Technical specifications:
- Module interface: UART
- Working current: Max.200 mA
- Output power: 24 DBM maximum
- Card read distance: > 30cm (range related to antenna, electronic tags and working environment)
- Sensitivity: typical - 102 DBM ;worst - 98 DBM
- Support baud rate: 9600, 19200, 38400, 57600, 115200 units (KBPS)
- Support agreement: ISO18000-6 c (EPC G2)
- Recognition time: read every 8 bytes less than 10 ms, write each byte less than 20 ms
- Ambient temperature: - 20 ° ~ + 65 deg C
- Module size: 155 mm * 100 mm
The interface definition:
- Red line: the module's power input 7 v / 2 a
- The black line: module GND
- Green line: pick A side of RS485
- Yellow line:RS485The B end of the
More information: click here
Data: click here
Package included:
- 1 x UHF RFID MODULE-UART card reader
- 3 x RFID card
- 3 x RFID sticker