• DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)
  • DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)

DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)

Availability: Out Of Stock

  • Price:$35.86
  • Price in reward points: 359 Reward Points: 4
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $35.14 $34.43 $33.35 $31.92 Contact US
Quantity:

DSTIKE ESP32 Watch DevKit TFT Color DevKit ESP32 Watch Development Board For Arduino (TFT Version)

What is it?

It is a ESP32 Watch development board. There are two versions: OLED version and TFT color version. Both version share the same bottom board.

Why did you make it?
This product was planned at the same time of deauther wristband. I learned a lot of experience from deauther wristband and I knew ESP32 is a better choice for a "Watch".

The breakout pads are also designed to connect different sensors.

TX/RX could be used to communicate with computer or other control board.

17/16 is IIC port could be connected with RTC module or other IIC sensors.

SVP/SVN could input ADC signals.

25/26 could output DAC signals.

What makes it special?
- Small size: 3.8x4.5cm
- Height:1.5cm
- Double 4 layer board
- On/OFF Power Switch
- OLED version:1.3OLED SH1106(SDA-17,SCL-16)
- TFT color version: ST7789 240*240 LCD(SDA-17,SCL-16,DC-22,RES-23)
- Buzzer-32
- WS2812b RGB LED-33
- Navigation Button(Up-19,Center-18,Down-5)
- OLED version external slide button(22,23)
- Highlight LED(27)
- Indicate charging LED(On means Charging,OFF means Full)
- Reset and Flash Button at Bottom board
- Breakout GPIOs(TX,RX,17,16,SVP,SVN,25,26,GND,3V)

SD Card Support:
- GPIO12--DAT2
- GPIO13--DAT3
- GPIO15--CMD
- GPIO14--CLK
- GPIO2--DAT0
- GPIO4--DAT1
- GPIO21--card

Tutorial:
1.Install the environment for ESP32
https://github.com/espressif/arduino-esp32

https://dstike.com/blogs/news/esp32-development-board-upload

2.Install OLED library
https://github.com/ThingPulse/esp8266-oled-ssd1306

Install TFT LCD library
https://github.com/lspoplove/Arduino-ST7789-Library

3.Install Adafruit NeoPixel Library
https://github.com/adafruit/Adafruit_NeoPixel

4.Code Example for oled version
https://github.com/lspoplove/D-duino-project/blob/master/ESP32WatchDev/ESP32WatchTest.ino

Code Example for TFT color version
https://github.com/lspoplove/Arduino-ST7789-Library/blob/master/examples/graphicstest/ESP32_Watch_graphicstest.ino

Upload config
https://dstike.com/blogs/news/esp32-development-board-upload

Package Included:
- 1 x DSTIKE ESP32 Watch DevKit (TFT Version)

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha