• E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module
  • E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module
  • E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module
  • E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module
  • E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module
  • E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module

E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module

Availability: In stock, usually dispatched in 1 business day

  • Price:$17.33
  • Price in reward points: 173 Reward Points: 2
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $16.98 $16.64 $16.12 $15.42 Contact US
Quantity:

E13-TTL 433MHz Wireless Data Transmission Module TTL Output 100mW Telemetry Module

Features:
- Model: E13-TTL
- Center frequency:433MHz
- measured distance:1700m
- max power :100mW
- component source: imported components
- Features:Watchdog, the wireless communication algorithm


Performance parameters:
- Module Size:20*36mm
- interface method:1*6*2.54mm(can use universal board or  Dupont Line)
- Power Supply:3.0V——5.2VDC
- Measured distance:1700m
- Communications  levels:2.5VDD——5.2VDC
- Maximum power:20dBm(about 100mW)
- Gbps:1Kbps—15Kbps ,A total of eight level
- Emission current:80mA
- Sinks current:15mA
- Communication interface:UART serial,8bit
- Transceiver length:A single continuous transmission limit of 256 bytes
- RSSI support:built-in Settings
- Working temps:-30℃~+85℃
- Working Humidity:10%— 90% RH
- Storage Temp:-40℃~+125℃
- Operating frequency:425MHz-450.6MHz(100KHz step ,Through software control)
- Receiving Sensitivity:-114dBm @ 1.2Kbps
 

 

 Name

 Direction

 Use

1

GND

 

Ground, connected to the power supply the reference

2

VCC

Input

power pin3.0 - 5.2V

3

SET

 Input

Low level into control electric mode, dangling or high level passthrough mode

4

TXD

 output

TLL serial port output, received external RXD

5

RXD

 Input

TLL serial port input, received external TXD

6

AUX

output

1.FREQ.7=0:A serial port output instructions, can be used to wake up or control the external equipment

2.FREQ.7=1:Wireless busy instructions, whether can be used to notify the user data sent complete


 

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha