EL-M150 AR9331 Module Openwrt Official Support 20 GPIO Wifi Smart Control Module

EL-M150 AR9331 Module Openwrt Official Support 20 GPIO Wifi Smart Control Module

Introduction:
- ELM150 is a highly integrated wireless routing module. It is not just a wireless WiFi module, it can be a complete router, only need electricity, wireless AP module it can work, if coupled with the network transformer and RJ45 network, wireless router is a 3 network interface. You can actually play the remote monitoring, remote control function.
- EL-M150 power consumption is very low, only 0.36W working alone,, very suitable for battery products, wireless transmission rate with 150Mbps, as many as 20 general purpose gpio. can be defined as the input to output.

Product application:
The 1 wireless network hard disk
2 wireless environment
3 remote monitoring
4 remote video
5 remote control
6 wireless remote control

Characteristic.
- Model: Elink EL-M150
- System: the default openwrt
- CPU: AR9331 400MHZ MIPS 24K kernel
- RAM: 512Mbit (64MByte) DDR2 400MHZ
- Flash: 32Mbit (4MByte) /64Mbit (8MByte) /128Mbit (16MByte)
- Wireless speed: 150Mbps
- General GPIO: 20 (not including TX, RX)
- USB: Usb 2 master interface, support USB hub extension
- Power supply voltage: 3.3V.
- Power consumption: 0.36W
- Wired: can be connected 3 100M network interface
- Antenna: built-in PCB antenna /ipx external antenna.
- Debugging: debug serial interface (TTL)
- Product size: 28.2 * 52MM