For Raspberry Pi 4B Python Development Board Kit Programming Learning DIY Kit 2GB Motherboard

For Raspberry Pi 4B Python Development Board Kit Programming Learning DIY Kit 2GB Motherboard

Raspberry Pi 4B:
-Bluetooth Upgrade 5.0: Bluetooth upgraded to 5.0BLE, low power consumption, more stable performance.
-Faster Processor: CPU is upgraded to 1.5HGz 64-bit, and the calculation speed of Cortex A72 architecture is more than 3 times that of Pi3B+.
-4K Dual Display: You can run two displays at the same time, or you can use 4K.
-New Power Management Solution: Adopt the more popular Type-C interface, support larger current input (5V 3A), double-sided pluggable, and stronger stability.

Features:
-Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC@1.5GHz.
-1GB LPDDR4-2400 SDRAM (depending on model).
-2.4GHz and 5.0GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE.
-Gigabit Ethernet.
-2 USB3.0 ports; 2 USB2.0 ports.
-For Raspberry Pi standard 40-pin GPIO connector (fully compatible with previous motherboards).
-2 micro-HDMI ports (up to 4kp60).
-2 channel MIPI DSI display port.
-Dual channel MIPI DSI camera port.
-4-pole stereo audio and composite video port.
-H.265 (4kp60 decoding), H264 (1080p60 decoding, 1080p30 encoding).
-OpenGL ES3.0 graphics.
-Micro-SD card slot for loading operating system and data storage.
-Provide 5V DC via USB-C connector (minimum 3A).
-Provide 5V DC voltage via GPIO connector (minimum 3A).
-Power supply via Ethernet (PoE) (requires separate PoE HAT).
-Working temperature: 0-50℃

Advantages:
-Multi-system support.
-New upgraded sensor kit.
-Provide instructional videos.
-Equipped with Friizing software breadboard wiring diagram.
-Multi-language programming.

Package List:
-1 x 4B Motherboard
-1 x IO Expansion Board
-1 x 16G TF Card
-1 x Card Reader
-1 x 4B Dedicated Power Supply
-1 x Breadboard
-1 x 40P Cable
-1 x Connection Cable
-1 x Acrylic Shell
-1 x Storage Box
-1 x DS18B20 Sensor
-1 x 360 Rotation Sensor
-1 x Relay Sensor
-1 x Laser Sensor
-1 x Magnet
-1 x Dual Color LED Sensor
-1 x RGB-LED Sensor
-1 x 7-color LED Sensor
-1 x Touch Switch Button
-1 x Tilt Switch Sensor
-1 x Vibration Sensor
-1 x IR Receiver Module
-1 x Active Buzzer Sensor
-1 x Passive Buzzer Sensor
-1 x Reed Sensor
-1 x U-shaped Photoelectric Sensor
-1 x AD/DA to PC F8591 Sensor
-1 x Raindrop Check Sensor
-1 x PS Operating Sensor
-1 x Potential Sensor
-1 x Hall Switch Module
-1 x Temperature Sensor
-1 x Sound Sensor
-1 x Flame Sensor
-1 x Photoresistor Module
-1 x Smoke Sensor
-1 x Touch Sensor
-1 x Ultrasonic Module
-1 x Infrared Remote Control
-1 x 40P Male to Female Cable
-1 x DHT11 Temperature Sensor
-1 x Infrared Obstacle Avoidance Sensor
-1 x IIC LCD1602 LCD Module
-1 x BMP180 Air Pressure Sensor
-1 x MPU6050 Gyroscope 3-axis Acceleration
-1 x DS15B20 Clock Sensor
-1 x Tracking Sensor
-1 x 7-inch Display (with shell)
-1 x Base Bracket
-1 x Micro HDMI to HDMI Cable
-1 x Double-sided Tape
-1 x RFID Radio Frequency Card Reader Sensor
-1 x DC Motor and Fixing Plate
-1 x Stepper Motor
-1 x PIR Human Body Pyroelectric Module
-1 x Motor Drive Module

Note:
-Due to different batches, there may be slight difference in some modules and accessories.
-The product is a DIY kit, not assembled.