FPV Racing F3 Acro Flight Controller 6 DOF for Quadcopter Drone Aircraft KING KONG

FPV Racing F3 Acro Flight Controller 6 DOF for Quadcopter Drone Aircraft KING KONG

Features:
- Better coding practices and introducing tests, easier to maintain and for future development. (Dominic has software development background)
- Many bugs fixed from Baseflight.
- Supports more flight controllers, including CC3D, CJMCU and Sparky.
- Supports OneShot ESC and more than 8 RC channels.
- Additional PID controllers that uses floating point arithmetic operations. (now has 3 built-in PID Controllers)
- Many more features such as RGB LED strip support, Autotune, In-flight PID tuning with your radio, blackbox flight data logging etc.

Flight Performance:
- The SPR F3 flight control builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
- No-Compromise I/O: Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
- Configurable: The SP F3 Flight Controller runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
- Tiny and lightweight: The RacingF3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
- Flight Logging: On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
- Next-Generation CPU: The Racing F3 has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.
- Loop times up to 2x as fast as previous-generation STM32F1 based boards.
- Developer Friendly: Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
- OneShot ESC: Full support for OneShot ESCs for easy PID tuning and a sharper response.
- Broad RC receiver Support: Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
- Programmable LED: Dedicated output for programmable LEDs - great for orientation, racing and night flying.
- Battery Monitoring: Battery monitoring ports for voltage and current.
- Sonar: Sonar support for precision low-altitude hold.
- I2C Port: I2C port always powered, perfect for external sensors or always-on OLED Screen.
- Buzzer: Buzzer port for audible warnings and notification

Specifications:
- DOF: 6
- Color: transparent blue
- Size: 45 x 20 x 11mm/ 1.8 x 0.8 x 0.4 inch
- Net weight: 27g

Package included:
- 1 x F3 Flight Controller
- 2 x Wire Rod
- 2 x Stickers
- 1 x Manual