FT232 USB To UART Converter (Type C) USB To UART TTL Communication Module Supports Multiple Systems

FT232 USB To UART Converter (Type C) USB To UART TTL Communication Module Supports Multiple Systems

Features:
- FT232 type c To UART (TTL) module
- Adopt FT232RL, compatible with 3.3V/5V logic level
- Original FT232RL chip
- Support for Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11 and so on
- 3x VCCIO power mode via jumper setting: VCCIO - 5V: 5V output. VCCIO - 3.3V: 3.3V output. Open the jumper: powered from target board (3.3V-5V)
- 3x LED indicators: TXD, RXD and PWR
- Pins accessible on pin headers: TXD, RXD, RTS# and CTS#
- Other pins are accessible on drilled holes, easily connected to user application system (the pin pitch is compatible with universal prototype board)

Get More Information Here:
https://www.waveshare.com/wiki/FT232_USB_UART_Board_(Type_C)

Package Included:
1. FT232 USB UART Board (Type C) x 1
2. For Dupont Line 6PIN x 1

Note:
- The other board pictured is not included, for demonstration purposes only. Thank you for your understanding!

Hardware Connection:
In the case of working with MCU

· VCCIO ↔ 3.3V or 5V output (the module is powered from Type C, and the onboard jumper should be shorted to 3.3V or 5V)
· GND ↔ GND
· TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
· RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
· RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
· CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)

Caution: The module is compatible with TTL level ONLY, to avoiding any damage, please DON'T direct connect it to RS232 circuit.