Happymodel Moblite6 1S 65mm Ultra Light Brushless Whoop Tiny Whoop Assembled For Flysky Receiver

Happymodel Moblite6 1S 65mm Ultra Light Brushless Whoop Tiny Whoop Assembled For Flysky Receiver

Specifications:
- Brand Name: Happymodel
- Item Name: Moblite6 1S 65mm ultra-light brushless whoop
- Wheelbase: 65mm
- Product Size: 80mm*80mm*25mm
- Net Weight: 18.5g (without battery)

Features:
- The lightest 1s 65mm brushless whoop
- Powerful and efficiency
- The lightest 1s AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
- VTX power switchable 25mw~200mw
- Low profile Canopy design

Package Included:
- 1 x 65mm Frame (Mobula6 frame)
- 1 x For DiamondF4 FS Built-in SPI Flysky Receiver
- 4 x EX0802 KV19000 Unibell Brushless Motors
- 1 x Gemfan 1219 31mm Propeller(4CW+4CCW)
- 1 x Runcam Nano4 Lite
- 1 x Built-in 5.8G 40ch 25mw-200mw VTX
- 1 x 1S USB Charger
- 1 x Propeller Disassemble Tool
- 1 x Screwdriver
- 1 x Happymodel Carry Case

Note:
- It is assembled and battery is not included in the package. 2pcs 1s 300mah Lipo batteries with PH2.0 connector are recommended.

Spare parts specifications:
Motor:
- Mode: EX0802 19000KV
- Configuration: 9N12P
- Stator Diameter: 8mm
- Stator Length: 2mm
- Shaft Diameter: Diameter 1mm
- Motor Dimension(Dia.*Len): Diameter 10.5mm*14.9mm
- Weight(g): 1.7g

Flight Controller:
- (For Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000 (SPI connection)
- Original whoop size compatible
- Built-in 5A (each) Blheli_S 4in1 ESC Dshot600 ready
- For Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- For Built-in SPI Frsky/Flysky receiver
- Built-in 5V 1A BEC

Onboard 4in1 ESC:    
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support for BLHeliSuite programmable
- Factory firmware: O_H_50_REV16_8.HEX
- Default protocol: DSHOT600

For Onboard Flysky SPI receiver Version:
- SPI BUS receiver
- Protocol: AFHDS and AFHDS-2A Switchable
- Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
- No ground interference (Transmitter and receiver 1 m from the ground): 200~300m
- Failsafe support

Onboard 5.8g VTX:
- Output power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA (type)
- Frequency: 5.8GHz 5bands 40 channels (include Race band)
- Smartaudio ready

Runcam Nano4 Lite:
- Model: RunCam Nano4 Lite
- Image Sensor: For 1/3" CMOS
- Horizontal Resolution: 800TVL
- Lens: 2.1mm (M8) FOV 160°    
- Signal System: PAL/NTSC Non-Switchable
- S/N Ratio: >50dB
- Electronic Shutter Speed: Automatic
- Automatic Gain Control (AGC): Automatic
- Min. Illumination: 0.01Lux at 1.2F
- D-WDR: Auto
- Day/Night: Color
- Power: DC 3-5.5V
- Current: 170mA at 5V 180mA at 3.3V
- Housing Material: ABS
- Net Weight: 1.0g
- Dimensions: L14mm*W12mm*H9mm