| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $88.73 | $86.92 | $84.20 | $80.58 | Contact US |
Happymodel Super200 Plus Upgraded Industrial Servo High Performance Robot Servo PWM 300 Degrees
Specification:
Input voltage: 24V (recommended to use battery power supply)
Speed (no load): 24V, about 0.46s/60°
Maximum torque: 200kg.cm
Holding torque: 70kg.cm
No-load current: <0.15A
Stall current: <11A at 24V
Input signal: PWM: 800us-2200us, 50-400Hz
Operating angle range: adjustable, minimum 60°, maximum 300°
Net weight: 748g
Features:
1. The servo is small in size and light in weight, and its internal structure has been improved.
2. The control and drive circuit hardware of the steering gear adopts the current mainstream components, which has faster calculation speed and smaller volume. It adopts a non-contact Hall sensor, which has higher resolution, wear-resistant, with longer service life and more reliable.
3. We added heat sinks to the servo motor drive tube. The heat sinks are connected to the aluminum housing of the steering gear, which has better heat dissipation effect and increases the reliability when the steering gear is locked.
4. Metal powder metallurgy teeth are used for the first-level teeth, steel-plastic composite teeth are used for the second-level gears, so that the noise is lower, and powder metallurgy gears are used for the third-level gears, which has good self-lubricity. The steel rolling gears used in the fourth and fifth gears are surface carburized and quenched, which improves the durability and impact resistance of the gears. The overall transmission structure is more reasonable.
5. Adopt high temperature resistant enameled wire, imported brushes and commutator to improve the motor's overload resistance. After many tests, the efficiency and speed of the motor have been optimized to make it react faster.
Package List:
1 x Motor
