i2C KC01 Battery Repair Instrument Battery Repair Tool with 0.96" Screen for iPhone 6 to 14 Pro Max

i2C KC01 Battery Repair Instrument Battery Repair Tool with 0.96" Screen for iPhone 6 to 14 Pro Max

Supported Model:
- For iPhone 6/6 Plus/6S/6S Plus/7/7 Plus/8/8 Plus/X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12/12 Pro/12 Mini /12 Pro Max/13/13 Mini/13 Pro/13 Pro Max/14/14 PLUS/14 PRO/14 PRO MAX.

Features:
- Comprehensive battery repair instrument supports for the full range of iPhone 6 to 14 Pro Max models.
- Automatic run cycle battery data automatically increase, supporting for iPhone 11-14 Pro Max series models.
- Your battery should be replaced first, and the data should be calibrated in the cycle of using the equipment.
- Automatic charging/discharging cycle, real-time view of battery data.
- Solve battery charging failure, sleep failure, and power-on failure.
- Efficient and fast charge, no damage to the battery, it can be charged to 65% in 30 minutes.
- The charging current/voltage data can be viewed in real-time.s
- Both offline and online modes are convenient for you.
- Support for iPhone 6-XS Max model standard bottom layer/large capacity bottom layer data repair.
- You can install external or internal battery cables for iPhone 11-14 Pro Max models to modify data.
- You are advised to change the battery cell first and modify the battery data
- Data can be modified directly for iPhone 6-XS Max models (To write standard underlying data or large-capacity underlying data and perform online operations)
- For iPhone 11-14 Pro Max models, install an external battery cable to modify the data.
- Automatically update data without bootstrap, update with charging times, Intelligent anti-protection, intelligent program assistant too green, support for the full range of iPhone 11-13Pro Max models.

Product Parameters:
- Brand: i2C
- Product model: KC01
- Product name: Comprehensive battery repair instrument
- Material: PCB+Acrylic
- Support model: for iPhone 6-14PM Full range of models

Functions:
- Read and write data at the bottom of the battery.
- Health and number of cycles changed.
- Running cycle efficiency increases automatically.
- Supports for iPhone 8-14 PD fast charging.
- Online software updates unlimited.
- Supports offline and online operations.
- Support charging voltage and current detection.

Operation Steps:
1. Fasten the battery to the seat of the device.
2. Set the mode to Data Read/Write mode.
3. Hold down the Switch key to modify data.
4. Click "OK" to burn after data modification.
5. Use a third-party non-original battery to guide the phone popover.
6. Install the battery with the modified data together with the external cable.

Package Included:
- 1 x KC01 main unit
- 1 x Type-c fast charging cable

Note:
- Battery is not included.
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!