MP21-10-2 Universal Wired Tool Setter Normally Close Engraving Machine Tool Setter CNC Processing Tool Set

MP21-10-2 Universal Wired Tool Setter Normally Close Engraving Machine Tool Setter CNC Processing Tool Set

Specification:
- Product model: MP21-10-2
- Dimensions: 47 x 25 x 39mm
- Pre – stroke: Almost zero
- Stroke/Travel: 5mm
- Alarm over travel output mode: NC (Normally close)
- Cable: 2M 4lamp pith; Tensile Strength 20N, the minimum bending radius R7
- Protecting tube: 1M (SS304), the minimum bending radius R25
- Air Blow equipment: Yes
- Output Mode: B: NC (Normally close)
- Positioning accuracy: 0.001mm (Operating Speed: 50-200mm/min)
- Service life: 3 million times
- Touch force: 1.5N
- Rated Voltage: DC24V 20mA (max) recommend (10mA) resistive load
- Protection class: IEC IP67
- Voltage range: 10-30V

Hose configuration method:
- Cut off the required hose length in the direction perpendicular to the axis. (The length shall be left with allowance)
- Thread the cap nut into the hose.
- The hose shall be threaded to the end of the threaded pipe. (The hose must be inserted in the innermost part to avoid air leakage and pipe slipping)
- Tighten the cap nut by hand.

Package Included:
- 1 x Tool setter