Blue Beidou + GPS Signal Repeater Indoor GNSS Signal Transponder with Omnidirectional TX Antenna

Blue Beidou + GPS Signal Repeater Indoor GNSS Signal Transponder with Omnidirectional TX Antenna

Features:
- Beidou + GPS signal repeater booster
- Its 360° omnidirectional transmitting antenna has a coverage radius of up to 35m/114.8ft
- Used for indoor positioning tests
- Applicable scenarios: office buildings, underground parking lots, indoor movie halls, aviation manufacturing, scientific research laboratories and factory workshops

Technical Parameters:
- Operating frequency: 1561MHZ (+10MHZ)/1575.42MHZ
- Gain: 60dB±2dB
- Port VSWR: <1.5
- Antenna interface form: SMA-F
- Output port: 1
- Impedance: 50Ω
- Operating voltage: AC 220V to +5VDC
- Operating temperature: -40°C to +85°C
- Dimensions: 165mm x 88mm x 40mm/6.5" x 3.5" x 1.6"
- Weight of main unit: 300g/0.7lb

Package Included:
- 1 x Main unit
- 1 x Outdoor receiving antenna
- 1 x Indoor transmitting antenna
- 1 x Power adapter

Packaging Details:
- Weight: 0.8kg

1. Install the outdoor antenna on the roof of a building or other places with good signals. Place the mushroom head of the antenna vertically upwards (you can download the test software with your phone for Android to test the number of satellites and signal strength in the place where the outdoor antenna is placed. The software name is: GPS TEST. Then choose the place where the signal is best to install the antenna).
2. Fix the outdoor antenna (25m/82ft). After the cables are arranged, connect the outdoor antenna to the INPUT port of the main unit.
3. Then the OUTPUT port of the main unit is connected to the 5m/16.4ft indoor transmitting antenna (when you are screwing the joint, it is necessary to tighten it in the right position, otherwise the needle in the joint is easy to be inserted inappropriately or accidentally).
4. The coverage radius of the indoor antenna is up to 35m/114.8ft. The antenna comes with a magnetic base. It is easy to install, and the omnidirectional transmitting antenna can be installed in the required area.
5. Turn on the power supply and turn on the main unit. At this point, the power indicator lights up and the device starts working.
6. Use the signal testing software to test the signal forwarding effect in the room. The number of target satellites should be over 4, and the signal strength is more than 38.