HiFi EL34 Vacuum Tube Power Amplifier Class A Push-Pull Integrated Power Amp 40W×2

HiFi EL34 Vacuum Tube Power Amplifier Class A Push-Pull Integrated Power Amp 40W×2

Description:
The whole machine adopts 400W H18 piece power transformer, Z11 piece foot 40W output cattle, imported ALPS 27 type potentiometer, large crystal speaker terminal, American CMC input RCA.

Specification:
Output power: 40W×2, 8Ω (equivalent to 200W of digital power amp and 120W of analog power amp class AB)
Load range: 4-8Ω
Frequency response: 20Hz--25KHz
Total harmonic distortion: 0.6% (1kHz)
Input sensitivity: 500mV--2000mV
Input impedance: 100KΩ
Signal to noise ratio: 96dB
Volume (width × height × depth): 394 × 181 × 339mm
Tube: PSVANE EL34B×2, 6N8P/6sn7*4
Net weight: 21kg (with package)

Multiple Protections:
DC Protection System: Automatically detect the internal circuit conditions of the machine, automatically disconnect the circuit and the speaker to ensure that the speaker has been working in a safe state.
Anti-impact Delay System: To prevent the impact of the loudspeaker at the moment of booting, and to eliminate the popping sound generated by booting.
Temperature Overheat Protection: When the temperature exceeds the safe range, it can automatically reduce the current and output to protect the safety of the whole machine.

Panel Function:
-The toggle switch on the left side of the front panel is a power switch, and the switch on the right side is a 2-way input selector switch, with indicator lights on the upper and lower.
-In the middle is the volume control.
-There are 2 groups of RCA input terminals on the left side of the rear panel, and 2 groups of speaker outputs which can be connected with 4 or 8 ohms according to your speaker impedance.

Package List:
1 x Power Amplifier