SINCOTECH EVC Car Turbo Charger Controller Boost Electronic Valve Controller LCD Digital Display DO701

SINCOTECH EVC Car Turbo Charger Controller Boost Electronic Valve Controller LCD Digital Display DO701

Specification:
Model: DO701
Display: digital
Working Voltage: 11-16V
Pressure control range: baseline~31.0psi
Size: 90*49*29mm

Features:
1. Directly input the required voltage value under mode A and mode B, the solenoid valve controller can be pressurized.
2. Turn off the controller, the boost level returns to the reference value.
3. A/B mode can preset the specified boost value according to user needs.
4. All set boost values are recorded.
5. If the boost pressure exceeds the warning value set by the user, the boost controller will prompt the user and beep. At the same time reduce the boost value or the preset value set by the user to prevent excessive boost from damaging the turbine engine.
6. The background brightness of 7 gears can be adjusted as needed to adapt to various lighting.

Package List:
1 x Turbo Charger Controller Kit

Wiring Instructions:
1. Press the upward switch to adjust the set value and the boost pressure alarm value of the booster. It can also be used to observe the memory peak value.
2. Press the downward switch to adjust the set value and the pressure alarm value of the booster. It can also be used to clear the memory peak value.
3. Press the "SET" switch to enter A or B setting mode.
4. Press the "SEL" switch to select the mode.
5. Connect the power supply.
6. Connect the electronic valve.
7. Connect the sensor.