M5Stack TAB5 Portable Intelligent IoT Controller ESP32-P4 + ESP32-C6 5-inch 1280x720 Touch Screen with NP-F550 Battery

M5Stack TAB5 Portable Intelligent IoT Controller ESP32-P4 + ESP32-C6 5-inch 1280x720 Touch Screen with NP-F550 Battery

Description:
- Tab5 is a developer-oriented, highly extensible portable IoT terminal development device that integrates a dual-SoC architecture and abundant hardware resources. Its main controller is the RISC-V-based ESP32-P4 SoC, equipped with 16 MB Flash and 32 MB PSRAM; the wireless module uses ESP32-C6-MINI-1U, supporting Wi-Fi 6 with an antenna system that can switch between a built-in 3D antenna and an external MMCX antenna port, flexibly adapting to different deployment environments and ensuring high data throughput and low latency.

- For visuals and interaction, Tab5 features a 5″ 1280×720 IPS TFT display driven over MIPI-DSI, with touch input handled by the GT911 multi-touch controller (I²C) for smooth, precise response. A MIPI-CSI-connected SC2356 2MP camera (1600x1200) enables HD video capture, image processing, and edge AI applications (e.g., face recognition, object tracking).

- I/O and expansion include USB-A (Host) and USB-C (USB 2.0 OTG) ports for traditional peripherals; industrial communication via RS-485 (SIT3088 with switchable 120 Ω termination); 1 × GROVE, 1 × M5BUS, GPIO_EXT header, and a Micro SD slot; plus a STAMP solder-pad for Cat.M/NB-IoT/LoRaWAN modules. A Reset/Boot button allows quick reset and firmware flashing.

- Audio/video uses an ES8388 audio codec with ES7210 AEC front end, dual-mic array, 3.5mm jack, and 1W 8Ω NS4150B speaker for high-fidelity recording and playback. The onboard BMI270 six-axis sensor (accel+gyro, interrupt wakeup) can trigger MCU wakeup on motion.

- Time and power management integrate an RX8130CE real-time clock (interrupt wakeup); a 2S NP-F550 removable Li-ion battery; and IP2326 charging, MP4560 buck-boost, and INA226 real-time monitoring circuits to ensure stable operation without external power. A side-mounted Power button provides one-touch on/off.

- Structure-wise, Tab5 features a side-mounted standard 1/4″-20 tripod mount nut for direct mounting to tripods or other supports, facilitating imaging and deployment.

- Tab5 is ideal for smart home control, remote monitoring, industrial automation, IoT prototyping, and educational research, offering developers and enterprises a full-featured, extensible, high-performance platform.

Features:
- ESP32-P4 dual-core MCU
- ESP32-C6 wireless module
- Wi-Fi 6
- Built-in 3D antenna & MMCX external antenna port
- 5″ 720P MIPI-DSI display
- GT911 multi-touch
- SC2356 2 MP camera
- USB-A Host + USB-C OTG
- RS-485 industrial interface
- Grove & M5BUS expansion
- Micro SD card slot
- STAMP expansion pad
- ES8388 audio codec
- ES7210 AEC dual microphones
- 1W speaker + 3.5 mm jack
- BMI270 six-axis sensor
- RX8130CE real-time clock
- Reset/Boot & Power buttons
- NP-F550 2S removable battery
- Standard 1/4″-20 tripod mount nut
- Development platforms: ESP-IDF

Application:
- Smart home control
- Remote monitoring systems
- IoT device development
- Industrial automation

Package Included:
- 1 x Tab5 Kit
- 1 x 1.25-6P Single-ended Terminal Wire
- 1 x NP-F550 2S 2000mAh Removable Battery