Tags: Metal Detector
|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$141.19||$138.31||$133.99||$128.22||Contact US|
Metal Detector Gold Detector Locator Scanner Detection Long Range Search Black 800m
- The strongest product kernel, intelligent modular operation
- Powerful + convenient + efficiency + speed
- Easy to use, advanced and efficient.
- Product Name: Metal Detector
- Model: 595552
- Color: Black
- Shell Material: Metal
- Case size: Approx. 38x27x8.5cm
- Search System: Microcomputer CPU control and reflection conductivity.
- Search Range: 800m
- Detecting Depth: 14m
- Energy: 12V 1000-1600mAh
- Launch Frequency: 5.6-6KHz
- Signal Frequency: 360-440Hz
- Adapter Model: KDL-121000
- Adapter Input: 100-240V 50-60Hz 0.3A
- Adapter Output: 12V 1A
- Working Time: 4-5h (After fully charged)
- Detection Type: Gold, Silver, Copper, Diamond, Precious Stones
Boot Test:Open the host with the search device switch, the search is work blink, when host preference copper gear, a search is corresponding copper instructions parade light, in turn, choose the host other silver, gold, and precious stones gear, a search is corresponding to the light of the instructions of the light.
Charging Methods:The instrument has been installed rechargeable batteries, direct access to the charger,can charge, charging time for 10-12 hours.
Operation Method:The main vertical hanging at the waist, and try to keep the legs parallel, if you are use the right hand operating search instrument, hang on the right waist, if you are left-handle, hang on the left.
Maintenance and Maintenance:
- Do not remove or modification of instrument.
- In the process of operation to avoid mobile phone or other metal near the instrument.
- Please at 0℃- 40℃ temperature and 10%-30% humidity environment use this instrument is the best.
- Use wire, needle etc metal will short circuit batteries, also will not battery with necklace metal put together, it could lead to electricity leak, overheating, burst and fire.
- Do not charge for more than 24 hours. Please use the 220V. Note: new battery only through two or three times complete charge and discharge cycle to achieve the best effect.
- Away from the dust and dirt, they can lead to corrosion and wear parts.
- Regularly with wet cloth to wipe the probe to keep its appearance neat and clean like new. Not using harsh chemicals cleaning products.
- Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
- Please allow little differs due to manual measurement.
- 1 x Aluminum Case
- 1 x Receiver scanning
- 1 x Transmiter
- 1 x Battery Adapter
- 1 x English User Manual
- 2 x Keys